CGY92 查看數據表（PDF） - Siemens AG

零件编号

产品描述 (功能)

生产厂家

CGY92

GaAs MMIC

Siemens AG 

GaAs MMIC

CGY92

_____________________________________________________________________________________________________

APPLICATION - HINTS

1. CW - capability of the CGY92

Proving the possibility of CW - operation there must be known the total power dissipation of the

device. This value can be found as a function of the temperature in the datasheet (page 10). The

CGY92 has a maximum total power dissipation of Ptot = 5 W.

As an example we take the operating point with a drain voltage VD = 3 V and a typical drain current

of ID=1.0 A. So the maximum DC - power can be calculated to:

P =V ⋅ I = 3W

DC D D

This value is smaller than 5 W and CW - operation is possible.

By decoupling RF power out of the CGY92 the power dissipation of the device can be further

reduced. Assuming a power added efficiency (PAE) of 40 % the total power dissipation Ptot can be

calculated using the following formula:

P = P (1− PAE ) = 3W(1− 0.40) = 1.8W

tot DC

2. Operation without using the internal current control

If you don' t want to use the internal current control, it is recommended to connect the negative

supply voltage at pin 1 (VTR) instead of pin 2 (VG). In that case VG is not connected.

3. Biasing and use considerations

Biasing should be timed such that gate voltage (VG) is always applied before the drain voltage (VD),

and when returning to the standby mode, gate voltage should only be removed once the drain

voltage have been removed.

Siemens Aktiengesellschaft

HL EH PD 21

pg. 13/14

17.10.95

Share Link: