DATA SHEET
SEMICONDUCTOR
GBPC12,15,25 AND 35 Series
GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
Reverse Voltage - 50 to 1000 Volts Current Voltage - 12.0 to 35.0 Amperes
FEATURES
•The plastic package has Underwriters Laboratory Flammability Classification 94V-0
•This series is UL recognized under component index, file number E54214
•Integrally molded heatsink provides very low thermal resistance for maximum heat
dissipation
•Universal 3-way terminals; snap-on, wire wrap-around, or P.C.B. mounting
•High forward surge current capabilities
•Glass passivated chip junctions
•Typical IR less than 0.3mA
•High temperature soldering guaranteed:
260°C/10 seconds at 5lbs. (2.3 kg) tension
•High temperature soldering : 260OC / 10 seconds at terminals
•Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
MECHANICAL DATA
•Case: Molded plastic with heatsink integrally mounted in the bridge encapsulation
•Terminals: Either plated 0.25" (6.35mm). Faston lugs or plated copper leads 0.040"
(1.02mm) diameter. Suffix letter "W" added to indicate leads (e.g. GBPC12005W).
•Mounting Position: See NOTE 3
•Polarity: Polarity symbols molded on body
•Mounting Torque: 20 in. - lb. max. Weight: 0.53 ounce, 15 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
GBPC12, 15, 25, 35
SYMBOLS 005 01 02 04 06 08 10 UNITS
Maximum repetitive peak reverse voltage
VRRM
50 100 200 400 600 800 1000 Volts
Maximum RMS voltage
VRMS
35 70 140 280 420 560 700 Volts
Maximum DC blocking voltage
VDC
50 100 200 400 600 800 1000 Volts
Maximum average forward
GBPC12
12.0
rectified output current
(SEE FIG.1)
GBPC15
GBPC25
I(AV)
15.0
Amps
25.0
GBPC35
35.0
Peak forward surge current single
GBPC12
200.0
sine-wave superimposed on
rated load (JEDEC Method)
GBPC15
GBPC25
IFSM
300.0
300.0
Amps
GBPC35
400.0
Rating (non-repetitive, for t
GBPC12
160.0
greater than 1ms and less
than 8.3ms) for fusing
GBPC15
I2t
GBPC25
375.0
375.0
A2 sec
GBPC35
660.0
Maximum instantaneous
GBPC12 IF=6.0A
forward voltage drop per
leg at
GBPC15 IF=7.5A
VF
GBPC25 IF=12.5A
1.1
Volts
GBPC35 IF=17.5A
Maximum reverse DC current at rated TA=25°C
IR
DC blocking voltage per leg
TA=125°C
5.0
uA
500.0
RMS isolation voltage from case to leads
VISO
2500.0
Volts
Typical junction capacitance per leg (NOTE 1)
CJ
300.0
pF
Typical thermal resistance per leg (NOTE 2)
GBPC12-25
GBPC35
RQJC
1.9
°C/W
1.4
Operating junction storage temperature range
TJ, TSTG
-55 to +150
°C
NOTES:
(1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(2) Thermal resistance from junction to case per leg
(3) Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw
http://www.yeashin.com
1
REV.02 20110725