GDM12864A 查看數據表（PDF） - Unspecified
零件编号
产品描述 (功能)
生产厂家
GDM12864A Datasheet PDF : 22 Pages
| |||
64CH Segment Driver For Dot Matrix LCD 18
6. Display On/Off Flip-Flop
The display on/off flip-flop makes on/off the liquid crystal display. When flip-flop is reset (logical low),
selective voltage or non selective voltage appears on segment output terminals. When flip-flop is set
(logic high), non selective voltage appears on segment output terminals regardless of display RAM data.
The display on/off flip-flop can changes status by instruction. The display data at all segment disappear
while RSTB is low.
The status of the flip-flop is output to DB5 by status read instruction.
The display on/off flip-flop synchronized by CL signal.
7. X Page Register
X page register designates pages of the internal display data RAM.
Count function is not available. An address is set by instruction.
8. Y address counter
Y address counter designates address of the internal display data RAM. An address is set by instruction
and is increased by 1 automatically by read or write operations of display data.
9. Display Data RAM
Display data RAM stores a display data for liquid crystal display. To indicate on state dot matrix of
liquid crystal display , write datra1. The other way , off state, writes 0.
Display data RAM address and segment output can be controlled by ADC signal.
ADC=H => Y-address 0: S1~Y address 63: S64
ADC=L => Y-address 0: S64~Yaddress 63: S1
ADC terminal connect the VDD or VSS.
10. Display Start Line Register
The display start line register indicates of display data RAM to display top line of liquid crystal display.
Bit data (DB<0.5>) of the display start line set instruction is latched in display start line register.
Latched data is transferred to the Z address counter while FRM is high, presetting the Z address
counter.
It is used for scrolling of the liquid crystal display screen.
© 1998 Intech LCD Group Ltd.
Share Link: 