5962F0723301VXC 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

5962F0723301VXC

Rad-hard 400 µA high-speed operational amplifier

STMicroelectronics 

Absolute maximum ratings and operating conditions

RHF310

1

Absolute maximum ratings and operating conditions

Table 2. Absolute maximum ratings

Symbol

Parameter

VCC

Vid

Vin

Tstg

Tj

Rthja

Rthjc

Pmax

ESD

Supply voltage (1)

(voltage difference between -VCC and +VCC pins)

Differential input voltage(2)

Input voltage range(3)

Storage temperature

Maximum junction temperature

Thermal resistance junction to ambient area

Thermal resistance junction to case

Maximum power dissipation(4) (at Tamb = 25° C)

for Tj = 150° C

HBM: human body model (5)

pins 1, 4, 5, 6, 7 and 8

pins 2 and 3

MM: machine model (6)

pins 1, 4, 5, 6, 7 and 8

pins 2 and 3

CDM: charged device model (all pins)(7)

Latch-up immunity

Value

6

±0.5

±2.5

-65 to +150

150

50

40

830

2

0.5

200

60

1.5

200

Unit

V

V

V

°C

°C

°C/W

°C/W

mW

kV

V

kV

mA

1. All voltages values are measured with respect to the ground pin.

2. Differential voltage is the non-inverting input terminal with respect to the inverting input terminal.

3. The magnitude of input and output voltage must never exceed VCC +0.3 V.

4. Short-circuits can cause excessive heating. Destructive dissipation can result from short circuit on

amplifiers.

5. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a

1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations

while the other pins are floating.

6. This is a minimum value. Machine model: a 200 pF capacitor is charged to the specified voltage, then

discharged directly between two pins of the device with no external series resistor (internal resistor < 5 Ω).

This is done for all couples of connected pin combinations while the other pins are floating.

7. Charged device model: all pins and package are charged together to the specified voltage and then

discharged directly to ground through only one pin. This is done for all pins.

Table 3. Operating conditions

Symbol

Parameter

Value

Unit

VCC Supply voltage

4.5 to 5.5

V

Vicm

Tamb

Common-mode input voltage

Operating free-air temperature range(1)

-VCC +1.5 V to

+VCC -1.5 V

V

-55 to +125

°C

1. Tj must never exceed +150°C. P = (Tj - Tamb / Rthja = (Tj - Tcase) / Rthjc with P the power that the RHF310

must dissipate in the application.

4/22

Doc ID 15577 Rev 3

Share Link: