TS64GSSD25S-M 查看數據表（PDF） - Transcend Information. Inc.

零件编号

产品描述 (功能)

生产厂家

TS64GSSD25S-M

2.5inch Solid State Disk

Transcend Information. Inc. 

TTSS88GGSSSSDD2255SS--SS

TTSS1166GGSSSSDD2255SS--SS//MM

TTSS3322GGSSSSDD2255SS--SS//MM

TTSS6644GGSSSSDD2255SS--SS//MM

TTSS112288GGSSSSDD2255SS--MM

TTSS119922GGSSSSDD2255SS--MM

2.5” Solid State Disk

4

5

6

7

0

1

2

3

4

EBh

Good Block Count, System Block Count

5

6

7

ECh-FFh Reserved

Max Erase Count

Max Erase Count (Low Byte)

Reserved

Reserved

Good Block Count (High Byte)

Good Block Count

Good Block Count (Low Byte)

System(Free) Block Count (High

Byte)

System(Free) Block Count (Low

Byte)

Reserved

Reserved

Reserved

SMART READ ATTRIBUTE THRESHOLD

This transfers 512 bytes of drive failure threshold data to the host.

SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE

Enables or disables the attribute value autosave function. This command specifies whether the current attribute values are

automatically saved to the drive when it changes the mode. This setting is maintained when the power is turned on and off.

SMART SAVE ATTRIBUTE VALUE

Saves any modified attribute values.

SMART EXECUTE OFF-LINE IMMEDIATE

This command of Non-data input causes the controller to immediately initiate the set of activities that collect SMART data

in a off-line mode and then save data to the Nand flash memory, or execute a selfdiagnostic test routine in either captive or

off-line mode.

SMART ENABL OPERATIONS

Enables the SMART function. This setting is maintained when the power is turned off and then back on. Once the SMART

function is enabled, subsequent SMART ENABLE OPERATIONS commands do not affect any parameters.

Transcend Information Inc.

34

V2.4

Share Link: