PT2386 查看數據表（PDF） - Princeton Technology

零件编号

产品描述 (功能)

生产厂家

PT2386

3D Effect IC

Princeton Technology 

3D Effect IC

Tel: 886-2-66296288

Fax: 886-2-29174598

URL: http://www.princeton.com.tw

PT2386

Symbol

A

A1

A2

b

b2

b3

c

D

D1

E

E1

e

eA

eB

eC

L

Min.

0.15

0.115

0.014

0.045

0.03

0.008

0.88

0.005

0.30

0.24

0.00

0.115

Nom.

0.13

0.018

0.06

0.039

0.01

0.90

0.31

0.25

0.1 BSC.

0.3 BSC.

0.13

Max.

0.21

0.195

0.022

0.07

0.045

0.014

0.92

0.325

0.28

0.43

0.60

0.15

Notes:

1. All dimensioning are in INCHES.

2. Dimensioning and tolerancing per ANSI Y14.5M-1982.

3. Dimension “A”, “A1”and “L” are measured with package seated in JEDEC Seating Plane Gauge

GS-3.

4. “D”, “D1” and “E1” dimensions do not include mold flash or protrusions. Mold flash or protrusions

shall not exceed 0.010 inch.

5. “E” and “eA” measured with the leads constrained to be perpendicular to datum-c- .

6. “eB” and “eC” are measured at the lead tips with the leads unconstrained.

7. “N” is the number of terminal position (N=18).

8. Pointed or rounded lead tips are preferred to ease insertion.

9. “b2” and “b3” maximum dimensions are not include dambar protrusions. Damber protrusions shall

not exceed 0.010 inch (0.25mm)

10. Distance between leads including Damber protrusions to be 0.005 inch minimum.

11. Datum plane -H- coincident with the bottom of lead, where lead exits body.

12. Refer to JEDEC MS-001, Variation AC

JEDEC is the trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.

PT2386 V1.1

- 14 -

February, 2006

Share Link: