TEN5-2413WI 查看數據表（PDF） - TRACO Electronic AG

零件编号

产品描述 (功能)

生产厂家

TEN5-2413WI

DC/DC Converters

TRACO Electronic AG 

DC/DC Converters

TEN 5WI Series 6 Watt

Input Specifications

Input current no load

24 Vin models 20 mA typ.

48 Vin models 10 mA typ.

Start-up voltage /

under voltage shut down

24 Vin models 9 VDC / 8.5 VDC typ.

48 Vin models 18 VDC / 16 VDC typ.

Surge voltage (1 sec. max.)

24 Vin models 50 V max.

48 Vin models 100 V max.

Reverse voltage protection 1.0 A max.

Conducted noise (input) EN 55022 level A, FCC part 15, level A

Output Specifications

Voltage set accuracy ±2.0 % max.

Regulation

– Input variation Vin min. to Vin max. ±0.5 % max.

– Load variation 10 – 100 %

single output models 1.0 % max.

dual output models 1.0 % max. balanced load

25 – 100 % 5.0 % max. unbalanced load

Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max

Temperature coefficient ±0.02 %/K

Current limitation >110 % of Iout max., constant current

Short circuit protection indefinite (automatic recovery)

Capacitive load

3.3 / 5 VDC models 470 µF max.

12 / 15 VDC models 100 µF max.

dual output models 100 µF max.

General Specifications

Temperature ranges

– Operating –40°C to +85°C

– Case temperature +100°C max.

– Storage –40°C to +125°C

Derating 3.5 %/K above +70°C

Humidity (non condensing) 95 % rel H max.

Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >800’000 h

Isolation voltage (60 sec.) – Input/Output 1’500 VDC

Isolation capacitance

– Input/Output 1000 pF typ

Isolation resistance

– Input/Output (500 VDC) >1‘000 M Ohm

Switching frequency 450 kHz typ. (Pulse frequency modulation PFM)

Safety standards cUL/UL 60950-1 , IEC/EN 60950-1

Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf

– RoHS directive 2011/65/EU

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

http://www.tracopower.com

Page 2 of 3

Share Link: