162GB11F0833SF714 查看數據表（PDF） - Amphenol Aerospace
零件编号
产品描述 (功能)
生产厂家
162GB11F0833SF714 Datasheet PDF : 41 Pages
| |||
CONTACT INSERTION
Contact Size
CAUTION: extra care is required in this operation to prevent damage
to the connector.
Remove the rear accessory and sleeve and slide back on wire bundle.
Select the proper removal tool for the size of contact from table 2. The
same tool is used for both pin and socket contacts. Position the
removal tool over the contacts to be removed and push until tool probe
is fully bottomed, shown when indicator band enters insert hole. Tool is
inserted to first band only when removing pin contacts and to the
second band for socket contact removal. Slide the plunger know
forward to remove contact.
Details of operator training are available from Amphenol upon request.
TABLE 2
Contact Colour
Size
Code
Removal Tool Part Number
Amphenol
M.S.
20
RED
294-89
MS 24256R-20
16
BLUE
294-97
MS 25246R-16
Indicator Band
CONTACT REMOVAL
Notice: Products are sold subject to Amphenol’s conditions of sale (“the standard conditions”). All specifications and statements contained
herein are believed to be correct at the time of printing but no representation or warranty, express or implied, is given as to any specification or
statement contained herein. Product specifications including performance characteristics are typical only and subject to deviation. Specifications
are also subject to change without notice. Users should not assume that all safety measures are indicated or that other measures may not be
required. No representation or warranty, express or implied, is given that any use of products (including any stated or suggested use) does not
infringe any patent, registered design or other third party rights and no stated or suggested use of products can be taken to recommend any such
infringement.
Amphenol
Thanet Way, Whitstable, Kent. CT5 3JF Tel: 01227 773200 Fax: 01227 276571
41
Share Link: 