WM8778SEDS/RV 查看數據表（PDF） - Wolfson Microelectronics plc
零件编号
产品描述 (功能)
生产厂家
WM8778SEDS/RV Datasheet PDF : 52 Pages
| |||
Production Data
INTERNAL POWER ON RESET CIRCUIT
WM8778
Figure 8 Internal Power on Reset Circuit Schematic
The WM8778 includes an internal Power on Reset Circuit which is used reset the digital logic into a
default state after power up.
Figure 8 shows a schematic of the internal POR circuit. The POR circuit is powered from AVDD. The
circuit monitors DVDD and VMID and asserts PORB low if DVDD or VMID are below the minimum
threshold Vpor_off.
On power up, the POR circuit requires AVDD to be present to operate. PORB is asserted low until
AVDD and DVDD and VMID are established. When AVDD, DVDD, and VMID have been established,
PORB is released high, all registers are in their default state and writes to the digital interface may
take place.
On power down, PORB is asserted low whenever DVDD or VMID drop below the minimum threshold
Vpor_off.
If AVDD is removed at any time, the internal Power on Reset circuit is powered down and PORB will
follow AVDD.
In most applications the time required for the device to release PORB high will be determined by the
charge time of the VMID node.
Figure 9 Typical Power up Sequence where DVDD is Powered before AVDD
w
PD, Rev 4.2, July 2008
13
Share Link: 