LZ1-1xxxxx
1 channel, Standard Star MCPCB (1x1) Dimensions (mm)
Notes:
Unless otherwise noted, the tolerance = ± 0.2 mm.
Slots in MCPCB are for M3 or #4-40 mounting screws.
LED Engin recommends plastic washers to electrically insulate screws from solder pads and electrical traces.
Electrical connection pads on MCPCB are labeled “+” for Anode and “-” for Cathode.
LED Engin recommends using thermal interface material when attaching the MCPCB to a heat sink.
The thermal resistance of the MCPCB is: RΘC-B 1.5°C/W
Components used
MCPCB:
HT04503
ESD/TVS Diode: BZT52C5V1LP-7
VBUS05L1-DD1
(Bergquist)
(Diodes, Inc., for 1 LED die)
(Vishay Semiconductors, for 1 LED die)
Pad layout
Ch.
MCPCB
Pad
String/die Function
1
1,2,3
4,5,6
1/A
Cathode -
Anode +
COPYRIGHT © 2015 LED ENGIN. ALL RIGHTS RESERVED.
LZ1-00G100 (5.5 – 02/06/15)
15
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com