Luminous Flux Bins
Table 1:
Bin Code
Minimum
Luminous Flux (ΦV)
@ IF = 700mA [1,2]
(lm)
Maximum
Luminous Flux (ΦV)
@ IF = 700mA [1,2]
(lm)
T
445
556
U
556
695
V
695
868
Notes for Table 1:
1. Luminous flux performance guaranteed within published operating conditions. LED Engin maintains a tolerance of
± 10% on flux measurements.
2. Future products will have even higher levels of luminous flux performance. Contact LED Engin Sales for updated information.
Dominant Wavelength Bins
Table 2:
Bin Code
Minimum
Dominant Wavelength (λD)
@ IF = 700mA [1,2,3]
(nm)
Maximum
Dominant Wavelength (λD)
@ IF = 700mA [1,2,3]
(nm)
G2
520
525
G3
525
530
G4
530
535
Notes for Table 2:
1. Dominant wavelength is derived from the CIE 1931 Chromaticity Diagram and represents the perceived hue.
2. LED Engin maintains a tolerance of ± 1.0nm on dominant wavelength measurements.
3. Refer to Figure 6 for typical dominant wavelength shift over forward current.
Forward Voltage Bins
Table 3:
Bin Code
Minimum
Forward Voltage (VF)
@ IF = 700mA [1,2]
(V)
Maximum
Forward Voltage (VF)
@ IF = 700mA [1,2]
(V)
0
13.0
19.0
Notes for Table 3:
1. Forward Voltage is binned with all four LED dice connected in series.
2. LED Engin maintains a tolerance of ± 0.16V for forward voltage measurements for the four LEDs.
COPYRIGHT © 2013 LED ENGIN. ALL RIGHTS RESERVED.
LZ4-00G100 (5.4 – 11/18/13)
3
LED Engin | 651 River Oaks Parkway | San Jose, CA 95134 USA | ph +1 408 922 7200 | fax +1 408 922 0158 | em sales@ledengin.com | www.ledengin.com