HEF4060B(2016) 查看數據表（PDF） - NXP Semiconductors.
零件编号
产品描述 (功能)
生产厂家
HEF4060B Datasheet PDF : 14 Pages
| |||
HEF4060B
14-stage ripple-carry binary counter/divider and oscillator
Rev. 8 — 25 March 2016
Product data sheet
1. General description
The HEF4060B is a 14-stage ripple-carry binary counter/divider and oscillator with three
oscillator terminals (RS, REXT and CEXT), ten buffered outputs (Q3 to Q9 and Q11 to
Q13) and an overriding asynchronous master reset input (MR).
The oscillator configuration allows design of either RC or crystal oscillator circuits. The
oscillator may be replaced by an external clock signal at input RS. The clock input’s
Schmitt-trigger action makes it highly tolerant to slower clock rise and fall times. The
counter advances on the negative-going transition of RS. A HIGH level on MR resets the
counter (Q3 to Q9 and Q11 to Q13 = LOW), independent of other input conditions.
It operates over a recommended VDD power supply range of 3 V to 15 V referenced to VSS
(usually ground). Unused inputs must be connected to VDD, VSS, or another input.
2. Features and benefits
Tolerant of slow clock rise and fall times
Fully static operation
5 V, 10 V, and 15 V parametric ratings
Standardized symmetrical output characteristics
Inputs and outputs are protected against electrostatic effects
Specified from 40 C to +85 C
Complies with JEDEC standard JESD 13-B
3. Ordering information
Table 1. Ordering information
All types operate from 40 C to +85 C.
Type number
Package
Name
Description
HEF4060BT
SO16
plastic small outline package; 16 leads; body width 3.9 mm
Version
SOT109-1
Share Link: 