XG4E-3432 查看數據表（PDF） - OMRON Corporation

零件编号

产品描述 (功能)

生产厂家

XG4E-3432

Flat Cable Connectors

OMRON Corporation 

■ Tools and Accessories (Sold Separately)

XG4Z-0004 Polarizing Key

XG4Z-0005 Coding Pin

Polarity guides and slots can be used by

themselves to help prevent reverse inser-

tion. Use the Polarizing Key as well for best

results.

How to use

(To prevent erroneous insertion)

The Coding Pin is used to prevent confu-

sion when many Connectors with the same

number of contacts are lined up. It can also

be used to prevent reverse insertion when

using Connectors without a shroud like the

XG8 Unshrouded Plug. The Coding Pin

can also be used with XC5, and XC6 DIN

Connectors as well as with XG5 Discrete-

wire IDC Connectors.

Material: PBT resin

(UL94V-0)/white

Insert

Twist

Polarizing Key

Material: PBT resin

(UL94V-0)/white

How to use

Twist

Insert

Twist

Polarizing Key slot

Note: Each XG4Z-0004 has 4 Polarizing

Keys.

Note: 1. A contact with a Coding Pin in-

serted cannot be used.

2. Each XG4Z-0005 has 4 Polarizing

Keys.

XY2E-0002 Contact Cutting Driver

The Contact Cutting Driver is used to cut

(twist off) a contact on the mating Plug

when using an XG4Z-0005 Coding Pin.

How to use

Twist

Insert the plug

contact into the

groove on the

Driver, and twist

off the contact

from the base.

Model

XG4Z-0004

XG4Z-0005

XY2E-0002

Lock Lever for XG8B and XG8W Plugs (With Right-angle

Terminals)

XG5Z-0002

Use to lock Unshrouded Plugs (for XG8B and XG8W Plugs with

right-angle terminals).

Lock Lever II for XG4C Plugs

XG4Z-0002

Use to lock XG4C Box-type Plugs.

Material: Polyamide resin

(UL94V-2)/natural

Material: Polyamide resin

(UL94V-2)/natural

Lock Lever

Tab

XG4M

Insert the tab on the Lock

Lever into the guide hole.

Polarity guide hole

XG4M

XG4C

Model

XG5Z-0002

XG4Z-0002

XG8B

■ Precautions

Correct Use

• Automated Soldering Conditions (Jet

Flow)

1. Soldering temperature: 250 ±5°C

2. Continuous soldering time: Within 5 s

• Soldering

Solder-mount the XG4A with the lock levers

fully closed or fully open.

Solder-mounting the XG4A with the lock

lever half-open may cause play in lock lever

due to thermal deformation of the housing.

• Storage

If the lock levers of the XG4A or XG4E con-

nector are left at an intermediate position

for a long time, they may get to feel loose in

operation due to deterioration of the plastic

part. When the lock levers are not used,

store the plug with the lock levers fully

closed or fully open.

Flat Cable Connectors XG4

19

Share Link: