AT88SA10HS Host Authentication Chip [Preliminary]
Mode Encoding
Bit 5 of the mode is used to indicate whether or not the secret fuse bits are to be included in the calculation. The
remaining bits of the mode field are ignored by the AT88SA10HS and should be 0.
Table 11. Mode Encoding
Bit[5]
Fuse Block
0
No fuse values inserted.
1
Insert the values of Fuse[0-63] in the message.
If Fuse[87] has not been burned, then the values of Fuse[0-63] will be replaced by 0’s in the above message
generation step as a security measure.
15
8595B–SMEM–09/09