TP3B107K6R3C1700AS 查看數據表（PDF） - Vishay Semiconductors

零件编号

产品描述 (功能)

生产厂家

TP3B107K6R3C1700AS

Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT™ Molded Case, High Performance, Automotive Grade

Vishay Semiconductors 

www.vishay.com

Typical Performance Characteristics

Vishay Sprague

Molded Chip Tantalum Capacitors, Automotive Grade

ELECTRICAL PERFORMANCE CHARACTERISTICS

ITEM

PERFORMANCE CHARACTERISTICS

Category temperature range

-55 °C to +85 °C

(to +125 °C / +150 °C / +175 °C with voltage derating - refer to graph “Category Voltage vs. Temperature”) (1)

Capacitance tolerance

± 20 %, ± 10 %, tested via bridge method, at 25 °C, 120 Hz

Dissipation factor

Limits per Standard Ratings table. Tested via bridge method, at 25 °C, 120 Hz

ESR

Limits per Standard Ratings table. Tested via bridge method, at 25 °C, 100 kHz

Leakage current

After application of rated voltage applied to capacitors for 5 min using a steady source of power with 1 kΩ

resistor in series with the capacitor under test, leakage current at 25 °C is not more than 0.01 CV or 0.5 μA,

whichever is greater. Note that the leakage current varies with temperature and applied voltage. See graph

“Typical Leakage Current Temperature Factor” for the appropriate adjustment factor.

Capacitance change by

temperature

+30 % max. (at +175 °C)

+20 % max. (at +125 °C and +150 °C)

+10 % max. (at +85 °C)

-10 % max. (at -55 °C)

Reverse voltage

Capacitors are capable of withstanding peak voltages in the reverse direction equal to:

10 % of the DC rating at +25 °C

5 % of the DC rating at +85 °C

1 % of the DC rating at +125 °C

Ripple current

For maximum ripple current values (at 25 °C) refer to relevant datasheet. If capacitors are to be used at

temperatures above +25 °C, the permissible RMS ripple current (or voltage) shall be calculated using the

derating factors:

1.0 at +25 °C

0.9 at +85 °C

0.4 at +125 °C

0.3 at +150 °C

0.2 at +175 °C

Maximum operating

and surge voltages vs.

temperature

+85 °C

RATED VOLTAGE SURGE VOLTAGE

(V)

(V)

+125 °C

CATEGORY

VOLTAGE

(V)

SURGE VOLTAGE

(V)

+150 °C / +175 °C

CATEGORY

VOLTAGE

(V)

4

5.2

2.7

3.4

n/a

6.3

8

4

5

3

10

13

7

8

5

16

20

10

12

8

20

26

13

16

10

25

32

17

20

12.5

35

46

23

28

17.5

50

65

33

40

25

50 (2)

60

33

40

n/a

63

75

42

50

n/a

75 (3)

75

50

50

n/a

Notes

• All information presented in this document reflects typical performance characteristics

(1) Series TH3 - up to 150 °C; TH4 - up to 175 °C

(2) Capacitance value 15 μF and higher

(3) For 293D and TR3 only

RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperature below +85 °C)

VOLTAGE RAIL

≤ 3.3

5

10

12

15

≥ 24

CAPACITOR VOLTAGE RATING

6.3

10

20

25

35

50 or series configuration

Note

• For temperatures above +85 °C the same voltage derating ratio is recommended, but with respect to category voltage.

Up to +85 °C: category voltage = rated voltage

At +125 °C: category voltage = 2/3 of rated voltage

At 150 °C / 175 °C: category voltage = 1/2 of rated voltage

Revision: 26-Jun-17

1

Document Number: 40215

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Share Link: