WPMDM1500602 / 171050601
MagI3C Power Module
VDRM – Variable Step Down Regulator Module
For this power module a minimum value of 200µF is recommended to keep the loop stable.
In order to choose the value of the output capacitor, the following steps should be utilized:
1. Start with the minimum COUT recommended (200µF), essential for a stable operation.
2. Measure td.
3. Calculate the appropriate value of COUT for the maximum voltage drop Vdischarge allowed at a defined load step,
using the following equation (12), derived from equation (11):
COUT≥
∆IOUT∙td
2∙Vdischarge
(12)
4. As mentioned above, changing COUT affects also td. Therefore, step 2 and step 3 should be repeated to find the
best performance.
we-online.com
© July 2018
Würth Elektronik eiSos GmbH & Co. KG – Data Sheet Rev. 2.0
23/56