TUNS700F28-P 查看數據表（PDF） - Unspecified
零件编号
产品描述 (功能)
生产厂家
TUNS700F28-P Datasheet PDF : 11 Pages
| |||
AC-DC Power Supplies Bus Converter.Power Module Type Ordering information
TUNS500F
TUN S 500 F 48 -O
1
2
3
4
5
6
1Series name
R
2Single output
3Output wattage
4Universal Input
5Output voltage
6 Optional
T : with Mounting hole
(f3.4 thru)
Y1: Outputvoltage adjustment
range ±20% (Only 48V)
R1: with Remote ON/OFF
R2: with Remote ON/OFF
(Low standby power)
*Avoid short circuit between +BC/R and -BC. It may cause the failure of inside components.
*Keep TRM open, if output voltage adjustment is not necessary.
*If remote sensing is not necessary, connect between +Vout & +S and between -Vout & -S.
MODEL
MAX OUTPUT WATTAGE[W]
DC OUTPUT
TUNS500F12
504
12V 42A (Peak 55A)
TUNS500F28
504
28V 18A (Peak 24A)
TUNS500F48
504
48V 10.5A (Peak 14A)
SPECIFICATIONS
TUNS
MODEL
TUNS500F12
TUNS500F28
TUNS500F48
VOLTAGE[V]
AC85 - 264 1f
CURRENT[A]
ACIN 100V 6.0typ (Io=100%)
ACIN 200V 3.0typ (Io=100%)
FREQUENCY[Hz]
50/60 (47 - 63)
INPUT
EFFICIENCY[%]
ACIN 100V 84typ
ACIN 200V 86typ
87typ
90typ
88typ
90.5typ
ACIN 100V 0.96typ
POWER FACTOR (Io=100%)
ACIN 200V 0.93typ
INRUSH CURRENT
Limited by external resistance
LEAKAGE CURRENT[mA] 0.75max (ACIN 240V 60Hz, Io=100%, According to IEC60950-1)
VOLTAGE[V]
12
28
48
CURRENT[A]
*3 42 (Peak 55)
18 (Peak 24)
10.5 (Peak 14)
LINE REGULATION[mV]
24max
56max
96max
LOAD REGULATION[mV] 24max
56max
96max
RIPPLE[mVp-p]
0 to +100C*1 120max
-40 to 0C*1 150max
180max
200max
250max
300max
OUTPUT
0 to +100C*1 150max
RIPPLE NOISE[mVp-p]
-40 to 0C*1 200max
200max
300max
300max
450max
0 to +65C 120max
TEMPERATURE REGULATION[mV]
-40 to +100C 240max
280max
560max
480max
960max
DRIFT[mV]
*2 40max
90max
180max
Fixed (TRM pin open), adjustable by external resistor or external signal
OUTPUT VOLTAGE ADJUSTMENT RANGE[V]
9.60 - 14.40
22.40 - 33.60
38.40 - 52.80 (-Y1 Option : 38.4 - 57.6)
OUTPUT VOLTAGE SETTING[V] 11.91 - 12.29
27.56 - 28.44
47.24 - 48.76
OVERCURRENT PROTECTION
PROTECTION OVERVOLTAGE PROTECTION[V]
CIRCUIT AND
OTHERS
REMOTE SENSING
REMOTE ON/OFF
Works over 101% of peak current and recovers automatically
15.00 - 16.80
35.00 - 39.20
Provided
Optional (External power supply is required)
55.20 - 64.80 (-Y1 Option : 60.0 - 67.2)
INPUT-OUTPUT-RC
*5 AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C)
INPUT-FG
ISOLATION
OUTPUT-RC-FG
AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (20±15C)
*5 AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20±15C)
OUTPUT-RC
*5 AC100V 1minute, Cutoff current = 100mA, DC100V 10MW min (20±15C)
OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +100C (On aluminum base plate), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000 feet) max
STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 - 95%RH (Non condensing), 9,000m (30,000 feet) max
ENVIRONMENT
VIBRATION
10 - 55Hz, 49.0m/s2 (5G), 3minutes period, 60minutes each along X, Y and Z axis
IMPACT
196.1m/s2 (20G), 11ms, once each along X, Y and Z axis
SAFETY AND
AGENCY APPROVALS
UL60950-1, C-UL (CSA60950-1), EN60950-1
NOISE REGULATIONS HARMONIC ATTENUATOR Complies with IEC61000-3-2 (Class A) *4
OTHERS
CASE SIZE/WEIGHT
COOLING METHOD
117.3X12.7X61.5mm [4.62X0.5X2.42 inches] (WXHXD) / 190g max
Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink)
*1 Refer to instruction manual for measuring method of electric characteristics.
*2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output.
*3 ( ) means peak current. Avoid operating with peak current continuously. It may cause failure of the components inside the product.
There are limitation of available condition of the peak current, such as peak time, duty etc. (Refer to the instruction manual in detail.)
*4 Please contact us about another class.
*5 ”RC” is applicable when remote control (optional) is added.
TUNS-8
Share Link: 