DMF50036ZNBU-FW 查看數據表（PDF） - Optek Technology
零件编号
产品描述 (功能)
生产厂家
DMF50036ZNBU-FW Datasheet PDF : 17 Pages
| |||
2.7.Lighting Specifications
Ta=25℃
Parameter
Symbol Conditions
Min.
Typ.
Max.
Units Notes
Lamp Voltage
VL
－
－
380
－
Vrms 1
Lamp Current
IL
－
4.0
5.0
6.0
mArms 2
Starting Voltage
VS
－
－
－
900
Vrms 3
Surface Luminance
L
IL=5.0mA
50
－
－
cd/㎡ 4
Average Life
TAL
IL=5.0mA
－
10000
－
hrs
5
Note 1 : The voltage ( r.m.s. ) to maintain the electric discharge of the lamp. It is measured after lighting for
3 minutes .
Note 2 : The current ( r.m.s. ) to flow through the lamp with the electric discharge. It is measured after
lighting for 3 minutes.
Note 3 : The voltage at starting the electric discharge when the voltage is increased gradually from 0V.
Note 4 : Surface Luminance is specified by the initial data of luminance measured at the center of display
surface after 20 minutes power on. ( All ON pattern )
Note 5 : CFL life is defined as the time for which the initial luminance is attenuated by 50% of the
luminance value. Average Life representes the time elapsed at the point of time when the residual
ratio becomes below 50% when plural lamps are lighted in comparison with the definition of life
mentioned above.
I
N
VS
V
C
VL
F
L
IL
CFL Testing Circuit
DMF-50036ZNBU-FW (AT) No.98-0156
OPTREX CORPORATION
OPTREX
Page 7/17
Share Link: 