TA7288P
Application Circuit
Note 1: Select an optimum value for the capacitor by experiment.
Note 2: Utmost care is necessary in the design of the output, VCC, VM, and GND lines since the IC may be destroyed
by short-circuiting between outputs, air contamination faults, or faults due to improper grounding, or by
short-circuiting between contiguous pins.
Note 3: When turning on the power for the ICs, apply VS after VCC (or VCC and VS simultaneously). When shutting
off the power, drop VS before VCC (or VS and VCC simultaneously).
When turning on the power (VCC), keep both the inputs (IN1 and IN2) on a low level.
8
2007-06-27