DATA SHEET • SKY13330-397LF SP2T SWITCH
Table 4. SKY13330-397LF Truth Table
CTRL
ENABLE
1
1
0
1
X
0
Note:
1 = 1.65 to 2.70 V
0 = –0 to 0.4 V (control voltage must be ≤VDD at all times)
X = don’t care
Any state other than described in this Table places the switch into an undefined state. An undefined state will not damage the device.
Mode
RF1 to RF2
RF1 to RF3
Shutdown
Typical Performance Characteristics
(VBATT = 2.3 V to 4.8 V, CTRL = 0/1.65 V to 2.70 V, TOP = +25 °C, PIN = 0 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise
Noted)
Figure 3. Insertion Loss vs Frequency
Figure 4. Input Return Loss vs Frequency
Figure 5. Input to Output Isolation vs Frequency
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
August 17, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201407C