ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 4. Static Electrical Characteristics (continued)
Characteristics noted under conditions of 3.0V ≤ VDD ≤ 5.5V, 8.0V ≤ VPWR ≤ 28V, -40°C ≤ TC ≤ 125°C, unless otherwise
noted. Where applicable, typical values reflect the parameter’s approximate average value with VPWR = 13V, TA = 25°C.
Characteristic
Symbol
Min
Typ
Max
Unit
SWITCH INPUT (CONTINUED)
Input Offset Current when Selected as Analog
Input Offset Voltage when Selected as Analog
V(SP&SGINPUTS) to AMUX output
IOFFSET
-2.0
1.4
2.0
μA
VOFFSET
mV
-10
2.5
10
Analog Operational Amplifier Output Voltage
Sink 250 μA
VOL
mV
–
10
30
Analog Operational Amplifier Output Voltage
Source 250 μA
VOH
VDD - 0.1
–
V
–
Switch Detection Threshold
Temperature Monitor(9), (10)
Temperature Monitor Hysteresis(10)
VTH
3.70
4.0
4.3
V
TLIM
155
–
185
°C
TLIM(HYS)
5.0
10
15
°C
Notes
9. Thermal shutdown of 16mA and 32mA pull-up and pull-down current sources only. 4.0mA and 2.0mA current source/sink and all other
functions remain active.
10. This parameter is guaranteed by design; however it is not production tested.
33975
8
Analog Integrated Circuit Device Data
Freescale Semiconductor