VT33N2 查看數據表（PDF） - PerkinElmer Inc
零件编号
产品描述 (功能)
生产厂家
VT33N2 Datasheet PDF : 76 Pages
| |||
Photoconductive Cell Testing and General Notes
Production Testing of Photocells - PerkinElmer’s New Approach
Historically within this industry, vendors have set their
production testers to the limits specified on the
customer’s print. Measurement errors due to ambient
temperature, calibration of light source, light history
effect, plus any tester errors have always guaranteed that
a certain percentage of the cells shipped are out of
specification.
This practice is incompatible with the realities of today’s
marketplace, where quality levels are being measured in
parts per million.
With this new catalog, PerkinElmer is taking the
opportunity to correct this situation. for parts in this
catalog, PerkinElmer has pulled in the test limits on our
production testers to compensate for measurement
errors.
General Notes
(Refer to the following data specification pages.)
1 Photocells are supplied categorized into groups by resistance. All groups must be purchased together and PerkinElmer maintains
the right to determine the product mix among these groups.
2 Dimension controlled at base of package.
3 Photocells are tested at either 1 fc or 10 lux. 2 fc typical values shown in the tables are for reference only.
4 Cells are light adapted at 30 - 50 fc.
5 The photocell “grid” pattern can vary from that shown. PerkinElmer reserves the right to change mix grid patterns on any standard
product.
6 The resistance for any standard cell is controlled at only one light level. If the resistance at other light levels is a concern, please
contact the factory.
13
Share Link: 