TSOP385(2018) 查看數據表（PDF） - Vishay Semiconductors
零件编号
产品描述 (功能)
生产厂家
TSOP385 Datasheet PDF : 7 Pages
| |||
www.vishay.com
TSOP381.., TSOP383.., TSOP385..
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
1
2
3
19026
DESIGN SUPPORT TOOLS click logo to get started
Models
Available
MECHANICAL DATA
Pinning for TSOP381.., TSOP383.., TSOP385..:
1 = OUT, 2 = GND, 3 = VS
FEATURES
• Very low supply current
• Photo detector and preamplifier in one package
• Internal filter for PCM frequency
• Supply voltage: 2.5 V to 5.5 V
• Improved immunity against ambient light
• Insensitive to supply voltage ripple and noise
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
DESCRIPTION
These products are miniaturized receivers for infrared
remote control systems. A PIN diode and a preamplifier are
assembled on a lead frame, the epoxy package contains an
IR filter. The demodulated output signal can be directly
connected to a microprocessor for decoding.
The TSOP383.. series devices are optimized to suppress
almost all spurious pulses from energy saving lamps like
CFLs. AGC3 may also suppress some data signals if
continuously transmitted.
The TSOP381.. series are provided primarily for
compatibility with old AGC1 designs. New designs should
prefer the TSOP383.. series containing the newer AGC3.
The TSOP385.. series contain a very robust AGC5. This
series should only be used for critically noisy environments.
These components have not been qualified according to
automotive specifications.
PARTS TABLE
AGC
30 kHz
33 kHz
Carrier
frequency
36 kHz
38 kHz
40 kHz
56 kHz
Package
Pinning
Dimensions (mm)
Mounting
Application
Best choice for
LEGACY, FOR SHORT BURST
REMOTE CONTROLS (AGC1)
NOISY ENVIRONMENTS AND
SHORT BURSTS (AGC3)
VERY NOISY ENVIRONMENTS
AND SHORT BURSTS (AGC5)
TSOP38130
TSOP38330
TSOP38530
TSOP38133
TSOP38333
TSOP38533
TSOP38136
TSOP38336 (1)(6)
TSOP38536
TSOP38138
TSOP38338 (2)(3)(4)(5)
TSOP38538
TSOP38140
TSOP38340
TSOP38540
TSOP38156
TSOP38356
TSOP38556
Minicast
1 = OUT, 2 = GND, 3 = VS
5.0 W x 6.95 H x 4.8 D
Leaded
Remote control
(1) MCIR (2) Mitsubishi (3) RECS-80 Code (4) r-map (5) XMP-1, XMP-2 (6) RCMM
Rev. 1.6, 12-Apr-18
1
Document Number: 81743
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Share Link: 