MCX18N00A 查看數據表（PDF） - Sony Semiconductor
零件编号
产品描述 (功能)
生产厂家
MCX18N00A Datasheet PDF : 19 Pages
| |||
MCX18N00A/MCX18N00B
Notes on Handling
1) Static charge prevention
Micro unit CCDs are easily damaged by static discharge. Before handling be sure to take the following
protective measures.
a) Either handle bare handed or use non-chargeable gloves, clothes or material.
Also use conductive shoes.
b) When handling directly use an earth band.
c) Install a conductive mat on the floor or working table to prevent the generation of static electricity.
d) Ionized air is recommended for discharge when handling micro unit CCDs.
e) For the shipment of mounted substrates, use boxes treated for the prevention of static charges.
2) Please use IC socket for mounting of micro unit CCDs.
IC socket : HS6401-K YAMATO SCIENTIFIC CO.,LTD.
3) Dust and dirt protection
a) Operate in clean environments.
b) Do not either touch lens by hand or have any object come in contact with lens surfaces.
Should dirt stick to a lens surface, blow it off with an air blower.
(For dirt stuck through static electricity ionized air is recommended.)
c) Clean with a cotton bud and ethyl alcohol if the grease stained. Be careful not to scratch the lens.
d) Keep in a case to protect from dust and dirt. To prevent dew condensation, preheat or precool when
moving to a room with great temperature differences.
4) Do not expose to strong light (sun rays) for long periods.
5) Exposure to high temperature or humidity will affect the characteristics.
Accordingly avoid storage or usage in such conditions.
6) Micro unit CCDs are precise optical equipment that should not be subject to mechanical shocks.
– 16 –
Share Link: 