AT91SAM7SE32(2008) 查看數據表（PDF） - Atmel Corporation

零件编号

产品描述 (功能)

生产厂家

AT91SAM7SE32
(Rev.:2008)

Product Description

Atmel Corporation 

• One external 470 pF (or 1 nF) NPO capacitor should be connected between VDDOUT and

GND as close to the chip as possible.

• One external 2.2 µF (or 3.3 µF) X7R capacitor should be connected between VDDOUT and

GND.

Adequate input supply decoupling is mandatory for VDDIN in order to improve startup stability

and reduce source voltage drop. The input decoupling capacitor should be placed close to the

chip. For example, two capacitors can be used in parallel: 100 nF NPO and 4.7 µF X7R.

5.4 Typical Powering Schematics

The AT91SAM7SE512/256/32 supports a 3.3V single supply mode. The internal regulator input

connected to the 3.3V source and its output feeds VDDCORE and the VDDPLL. Figure 5-1

shows the power schematics to be used for USB bus-powered systems.

Figure 5-1. 3.3V System Single Power Supply Schematic

VDDFLASH

Power Source

ranges

from 4.5V (USB)

to 18V

DC/DC Converter

3.3V

VDDIO

VDDIN

VDDOUT

Voltage

Regulator

VDDCORE

VDDPLL

14 AT91SAM7SE512/256/32 Preliminary

6222ES–ATARM–04-Jan-08

Share Link: