LC7871E, 7871NE
Recommended Crystal Oscillator Constants
NTSC
PAL
Manufacturer
CITIZEN WATCH CO., LTD
CITIZEN WATCH CO., LTD
Oscillator
CSA-309 (14.31818 MHZ)
CSA-309 (17.734475 MHZ)
Cin/Cout
5 to 8 pF (Cin = Cout)
5 to 12 pF (Cin = Cout)
2. Subcode Interface: Pins S, SBSY, SFSY, PW, SBCK and MUTE
The S pin selects one of three interface modes, as shown in the table below. When a high level is applied to the
MUTE pin, SBSY and PW input are disabled, and SBCK output is disabled.
S
Mode
H
LC7861N/67 interface
M
LC7860K/63 interface
L
LC7868/69 interface
Note that the “M” level is typically 0.4 VDD.
• LC7860 interface (Symbols in parentheses are LC7860 pins.)
The conditions for SBCK output are as follows: confirmation of low levels on the SFSY pin about 2.2 µs after a
falling edge on SFSY.
Note: * SFSY will be high during the S0 and S1 periods.
* The SBSY pin must be held low.
• LC7861N/67 interface (Symbols in parentheses are DSP pins.)
The conditions for SBCK output are as follows: confirmation of a low level on the SBSY pin about 2.2 µs after a
falling edge on the SFSY pin in the LC7871E.
In the LC7871NE the conditions are confirmation of a low level on the SBSY pin about 2.2 µs after a rising edge
on the SFSY pin.
No. 4861-12/19