OPB901W55Z 查看數據表（PDF） - TT Electronics.

零件编号

产品描述 (功能)

生产厂家

OPB901W55Z

Photologic ® Slotted Optical Switch “Wide Gap” Series

TT Electronics. 

Photologic ® Slotted Optical

Switch “Wide Gap” Series

OPB900 through OPB913 Series (L, W_Z)

Electrical Specifications

DIMENSIONS ARE IN:

[ MILLIMETERS]

INCHES

Color-Pin # Description Color-Pin # Description Color-Pin # Description Color-Pin #

Red-1

Anode

Black-2

Cathode

White-3

VCC

Blue-4

Absolute Maximum Ratings (TA = -40°C to + 70° Unless otherwise noted)

Description

Output

Color-Pin #

Green-5

Description

Ground

Storage Temperature

-40° C to +85° C

Operating Temperature

Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)(1)

-40° C to +70° C

260° C

Input Infrared LED

DC Forward Diode (LED) Current

40 mA

DC Reverse Diode (LED) Voltage

Input Diode Power Dissipation(1)

2V

100 mW

Output Photologic®

Supply Voltage, VCC (not to exceed 3 seconds)

10V

Voltage at Output Lead (Open Collector Output version)

35 V

Output Photologic® Power Dissipation(2)

200 mW

Total Device Power Dissipation(3)

Notes:

(1) Derate linearly 2.22 mW/°C above 25°C

(2) Derate linearly 4.44 mW/°C above 25°C

(3) Derate linearly 6.66 mW/°C above 25°C

(4) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.

(5) Methanol or isopropanol are recommended as cleaning agents. The plastic housing is soluble in chlorinated hydrocarbons and keytones.

300 mW

General Note

TT Electronics reserves the right to make changes in product specification without

notice or liability. All information is subject to TT Electronics’ own data and is

considered accurate at time of going to print.

© TT electronics plc

TT Electronics | OPTEK Technology

1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200

www.ttelectronics.com | sensors@ttelectronics.com

Issue A 09/2016 Page 2

Share Link: