PMS152-S14 查看數據表（PDF） - Unspecified

零件编号

产品描述 (功能)

生产厂家

PMS152-S14

8bit OTP Type SuLED IO Controller

Unspecified 

PMS152

8bit OTP Type SuLED IO Controller

Pin Type &

Pin Name

Buffer Type

Description

PB6 /

CIN4- /

PG1PWM

IO

ST /

CMOS /

Analog

The functions of this pin can be:

(1) Bit 6 of port B. It can be configured digital input or two-state output, with pull-high

resistor.

(2) Minus input source 4 of comparator.

(3) Output of 11-bit PWM generator PWMG1.

When this pin is configured as analog input, please use bit 6 of register pbdier to

disable the digital input to prevent current leakage. The bit 6 of pbdier register can

be set to “0” to disable digital input; wake-up from power-down by toggling this pin is

also disabled.

PB5 /

PG0PWM /

INT0A

IO

ST /

CMOS

The functions of this pin can be:

(1) Bit 5 of port B. It can be configured as digital input or two-state output, with

pull-high resistor.

(2) Output of 11-bit PWM generator PWMG0.

(3) External interrupt line 0A. It can be used as an external interrupt line 0. Both

rising edge and falling edge are accepted to request interrupt service and

configurable by register setting.

The bit 5 of pbdier register can be set to “0” to disable digital input; wake-up from

power-down by toggling this pin is also disabled.

PB4 /

TM2PWM /

PG0PWM

IO

ST /

CMOS

The functions of this pin can be:

(1) Bit 4 of port B. It can be configured as digital input or two-state output, with

pull-high resistor.

(2) PWM output from Timer2

(3) Output of 11-bit PWM generator PWMG0.

The bit 4 of pbdier register can be set to “0” to disable digital input; wake-up from

power-down by toggling this pin is also disabled.

PB3 /

PG2PWM

IO

ST /

CMOS

The functions of this pin can be:

(1) Bit 3 of port B. It can be configured as digital input or two-state output, with

pull-high resistor.

(2) Output of 11-bit PWM generator PWMG2

The bit 3 of pbdier register can be set to “0” to disable digital input; wake-up from

power-down by toggling this pin is also disabled.

PB2 /

TM2PWM /

PG2PWM

IO

ST /

CMOS

The functions of this pin can be:

(1) Bit 2 of port B. It can be configured as digital input or two-state output, with

pull-high resistor.

(2) PWM output from Timer2

(3) Output of 11-bit PWM generator PWMG2

The bit 2 of pbdier register can be set to “0” to disable digital input; wake-up from

power-down by toggling this pin is also disabled.

©Copyright 2020, PADAUK Technology Co. Ltd

Page 15 of 91

PDK-DS-PMS152-EN_V105 –Jun. 9, 2020

Share Link: