1EDI2004AS 查看數據表（PDF） - Infineon Technologies

零件编号

产品描述 (功能)

生产厂家

1EDI2004AS

High Voltage IGBT Driver for Automotive Applications

Infineon Technologies 

EiceDRIVERTM SIL

1EDI2004AS

Functional Description

Table 10 WRITEH request and answer messages

Transfer 1

Transfer 2

Request message See below

N.a.

Answer message

N.a.

Va(PSTAT)

Request message words

Word 1: 4400H | ( DATA_8BIT << 1 ) | PB

2.4.4.5.9 WRITEL

This command aims at updating the value of the register whose address is specified in the request message.

This command is valid in all operating modes. However, depending on the active operating mode, this

command is restricted to a given address range or specific registers (see Table 38). If an access outside the

allowed address range is performed, the access is discarded as invalid and an SPI error occurs.

At the reception of this command, the least significant byte of the internal buffer is written with the specified

value, the contents of the buffer is copied to the register at the specified address and the complete write buffer

is cleared.

Table 11 describes the request message and the corresponding answer message.

Table 11 WRITEL request and answer messages

Transfer 1

Transfer 2

Request message See below

N.a.

Answer message

N.a.

Va(PSTAT)

Request message words

Word 1: A000H | ( ADDRESS_5BIT << 7 ) | ( DATA_6BIT << 1 ) | PB.

Data Sheet

30

Rev. 2.0

2019-01-16

Share Link: