HSN-2000L 查看數據表（PDF） - MAXWELL TECHNOLOGIES

零件编号

产品描述 (功能)

生产厂家

HSN-2000L

Nuclear Event Detector

MAXWELL TECHNOLOGIES 

Nuclear Event Detector

HSN-2000

Table 2. Notes

1. Standby mode is the normal state of the device, defined as having the NED output (pin 2) in the “high” state.

2. Operational mode is in effect during the timeout period of the NED signal, characterized by having the NED output in the “low”

state, causing the greatest current draw of the device.

3. BIT electrical characteristics are not guaranteed over the radiation range.

4. BIT may not meet specification when only a resistor is used to adjust the detection level. To use BIT in this situation, it is

advised that a series resistor/capacitor combination is used.

5. Guaranteed but not tested over temperature. Time delay, tD, is measured at 50% points from the rising edge of the radiation

pulse to the falling edge of the NED output at approximately 10 times the detection level.

0.100

TYP

0.600

0.015 ± 0.003

0.500

MIN

14 13 12 11 10 9 8

0.495

1234567

0.145 MAX

0.070 ± 0.002

TOP VIEW

0.795

0.600

0.100 TYP

14 13 12 11 10 9 8

1234567

0.495

0.300

0.145 MAX

0.795

0.010 ± 0.002

Flatpack Hybrid Package

HSN-500F

All tolerances are ± 0.005 unless specified

0.016

0.020

DIA

DIP Hybrid Package

HSN-500L

0.200

MECHANICAL DIMENSIONS

Note: All dimensions in inches.

01.07.05 Rev 3

All data sheets are subject to change without notice 3

©2005 Maxwell Technologies

All rights reserved.

Share Link: