MTV130P 查看數據表（PDF） - Myson Century Inc

零件编号

产品描述 (功能)

生产厂家

MTV130P

On-Screen Display for LCD Monitor

Myson Century Inc 

MYSON

TECHNOLOGY

MTV130

tents of CH4-CH0 is greater than or equal to 18, it will be regarded as equal to 17. See Table 2

and Table 3 for detail description of this operation.

b7 b6 b5 b4 b3 b2 b1 b0

Column 15

Reserved

This byte is reserved for internal testing.

b7 b6 b5 b4 b3 b2 b1 b0

Column 16 -

-

-

RSPACE

MSB

LSB

RSPACE - Define the row to row spacing in unit of horizontal line. That is, extra RSPACE horizontal lines will

be appended below each display row, and the maximum space is 31 lines. The initial value is 0

after power up.

b7

b6

b5

b4

b3

b2

b1

b0

Column 17 OSDEN BSEN SHADOW FBEN BLEND WENCLR RAMCLR FBKGC

OSDEN - Activate the OSD operation when this bit is set to "1". The initial value is 0 after power up.

BSEN - Enable the bordering and shadowing effect.

SHADOW - Bordering and shadowing effect select bit. Activate the shadowing effect if this bit is set, otherwise

the bordering is chosen.

FBEN - Enable the fade-in/fade-out and blending-in/blending-out effect when OSD is turned on from off state

or vice verca.

BLEND - Fade-in/fade-out and blending-in/blending-out effect select bit. Activate the blendinf-in/blending-out

function if this bit is set, otherwise the fade-in/fade-out function is chosen. These function roughly

takes about 0.5 second to fully display the whole menu or to disappear completely.

WENCLR - Clear all WEN bits of window control registers when this bit is set to "1". The initial value is 0 after

power up.

RAMCLR - Clear all ADDRESS bytes, BGR, BGG, BGB and BLINK bits of display registers when this bit is set

to "1". The initial value is 0 after power up.

FBKGC - Define the output configuration for FBKG pin. When it is set to "0", the FBKG outputs high during the

displaying of characters or windows, otherwise, it outputs high only during the displaying of charac-

ter.

B7

b6

b5

b4

b3

b2

b1

b0

Column 18 TRIC FSS

-

DWE HSP VSP PWM1 PWM0

TRIC - Define the driving state of output pins ROUT, GOUT, BOUT and FBKG when OSD is disabled. That is,

while OSD is disabled, these four pins will drive low if this bit is set to 1, otherwise these four pins are

in high impedance state. The initial value is 0 after power up.

FSS - Font size selection.

= 1 ⇒ 12x18 font size selected.

= 0 ⇒ 12x16 font size selected.

Revision 1.0

10/18

28/April/2000

Share Link: