DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

SC9257 查看數據表(PDF) - Silan Microelectronics

零件编号
产品描述 (功能)
生产厂家
SC9257
Silan
Silan Microelectronics Silan
SC9257 Datasheet PDF : 28 Pages
First Prev 21 22 23 24 25 26 27 28
Silan
Semiconductors
SC9257
Lock detection bits
The lock detection bits detect locked states in the PLL system. These systems have an unlock detection bit (unlock
bit) which is used to detect, using the reference frequency cycle, the phase difference between the reference
frequency and divided output of programmable counter. These systems also have phase error detection bits ( bits
PE1~PE3), which are capable of more precise detection (±0.55µs~±7.15µs).
1. Unlock detection bit (UNLOCK)
This bit detects, using the reference frequency cycle, the phase difference between the reference
frequency and the divided output of the programmable counter. When there is no lock, that is, when the
reference frequency and the divided output of the programmable counter are not the same, unlock F/F is set.
Unlock F/F is reset every time the input register (D2H) unlock reset bit (RESET) is set to “1”. After unlock
F/F has been reset in this way, locked state can detected by checking the unlock detection bit (UNLOCK) of
the output register (D3H). After unlock F/F has been reset, the unlock detection bit must be checked after a
time interval exceeding that of the reference frequency cycle has elapsed. This is because the reference
frequency cycle inputs the lock detection strobe to unlock F/F. If the time interval is short, the correct locked
state cannot be detected. Therefore, the output register (D3H) has a lock enable bit (ENABLE). This bit is
reset every time the input register (D2H) reset bit is set to “1”, and set to “1” through the lock detection timing.
That is, the locked state is correctly detected when the lock enable bit (ENABLE) is “1”.
Reference frequency
Programmable
counter output
DO output
Phase comparator
Lock detection strobe
Unlock is reset (RESET)
High impedance
"L" level
"H" level
Unlock F/F (UNLOCK)
Lock enable (ENABLE)
Phase error detection
Counts phase difference.
Fig.10
HANGZHOU SILAN MICROELECTRONICS JOINT-STOCK CO.,LTD
REV: 1.0
21
2001.10.18

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]