TDA4510/V9 查看數據表（PDF） - Philips Electronics

零件编号

产品描述 (功能)

生产厂家

TDA4510/V9

PAL decoder

Philips Electronics 

Philips Semiconductors

PAL decoder

− change in burst amplitude with supply voltage (± 10%)

− change in burst amplitude with temperature

− voltage at pin 5 at nominal input signal

Demodulator part

Input burst signal amplitude (peak-to-peak value)

between pins 21 and 22; note 6

Input impedance between pins 21 and 22

Ratio of demodulated signals for equal input

signals at pins 21 and 22

(B-Y)/(R-Y)

(G-Y)/(R-Y); no (B-Y) signal

(G-Y)/(B-Y); no (R-Y) signal

Frequency response between 0 and 1 MHz

Cross talk between colour demodulated signals

Phase difference between (R-Y) signal

and (R-Y) reference signal

Phase difference between (R-Y)

and (B-Y) reference signals

R.G.B. matrix and amplifiers

Output voltage (peak-to-peak value)

at nominal luminance/contrast

(black to white); note 3

Output voltage (peak-to-peak value) of the RED

channel at nominal contrast/saturation and

no luminance signal at the input, (R-Y) signal

Maximum peak white level; note 7

Maximum output current

Black level at the output for a

brightness control voltage of 2 V

Difference in black level between the three

channels at an output level of 3 V; note 8

Black level shift with vision contents

Brightness control voltage range

September 1982

6

Product specification

TDA3561A

V5−27

proportional

typ. 0,1

%/K

< 0,25

%/K

typ. 5

V

V21−22(p-p)

typ. 100

mV

Z21−22

typ. 2

kΩ

VV-----11--62----––---22---77-

VV-----11--42----––---22---77-

VV-----11--46----––---22---77-

typ. 1,78 ± 10%

typ. −0,51 ± 10%

typ. −0,19 ± 25%

−3

dB

> 40

dB

< 5°

typ. 90°

85 to 95°

typ. 5,4

V12,14,16-27(p-p)

4,5 to 6,3

V

V

V12-27(p-p)

I12,14,16

V12,14,16-27

∆V

see Fig.5

typ. 5,25

V

3,7 to 6,7

V

typ. 9,3

V

9,0 to 9,6

V

< 15

mA

typ. 2,6

V

< 200

mV

< 40

mV

Share Link: