LM8V311 查看數據表（PDF） - Sharp Electronics

零件编号

产品描述 (功能)

生产厂家

LM8V311

DEVlCESPECIFICATIONfoor for Passive Matrix Color LCD Module (640 X 480 dots)

Sharp Electronics 

SHARP

SPEC x0.

LC983 12

.MODEL

No.

LYiM8V311

PAGE

1

OPrecautions

1) Indusuial(Mechanica1) design of the product in which this LCD module will be incorporated must be made

so that the viewing angle characteristics of the LCD may be optimized.

This module’s vieGig angle is illustrated in Fig.1.

f3 y MIN. < viewing angle < 0 y MAX

(For the specific values of 0 y MIN., and B y MAX., refer to the table )

Please consider the optimum viewing conditions according to the purpose when installing the module.

a >,’ ’ Viewin;gdirection +6 y

63 y=O ’ (Normalline)

Panel surface

Fie.1 Definition of viewine anele

2) This module should be installed using mounting holes of metal bezel.

When installing the module, pay attention and handle carefully not to allow any undue stress such as twist or

bend.

3) Since the front polarizer is easily damaged. Please pay attention not to scratch on its face.

It is recommended to use a transparent acrylic resin board or other type of protective panel on the surface

of the LCD module to protect the polarizer, LCD panel, etc..

4) If the surface of the LCD panel is required IO be cleaned, wipe it swiftly with cotton or other soft cloth. If

it is not still clear completely, blow on and wipe it.

5) Water droplets, etc. must be wiped off immediately since they may cause color changes, staining, etc., if

it remained for a long time.

6) Since LCD is made of glass substrate, dropping the module or banging it against hard objects may cause

cracking or fragmentation.

7) Since CMOS LSIs are equipped in this module, following countermeasures most be taken to avoid

electrostatics charge.

Share Link: