OPL530-OCA 查看數據表（PDF） - Optek Technology
零件编号
产品描述 (功能)
生产厂家
OPL530-OCA Datasheet PDF : 8 Pages
| |||
Photologic Sensor
OPL530, OPL531, OPL535, OPL536, OPL550, OPL551,
OPL560, OPL561, OPL562, OPL563
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
Operating Supply Voltage
OPL530, OPL530-OC, OPL531, OPL531-OC
OPL535, OPL535-OC, OPL536, OPL536-OC,
OPL560, OPL561 Series
4.5 - 16
V
OPL550, OPL551 Series
4.5 - 5.5
V
TEST CONDITIONS
-
-
VCC
Peak-to-Peak VCC Ripple Necessary to Cause
False Triggering of Output
OPL530, OPL530-OC, OPL531, OPL531-OC
-
-
2
OPL535, OPL535-OC, OPL536, OPL536-OC
OPL560, OPL561 Series
V f = DC to 50 MHz
OPL550, OPL551 Series
Supply Current(4)
OPL530, OPL530-OC, OPL531, OPL531-OC
OPL535, OPL535-OC, OPL536, OPL536-OC
ICC
OPL550, OPL551 Series
OPL560, OPL561 Series
Positive-Going Threshold Irradiance(3)
OPL530, OPL530-OC, OPL531, OPL531-OC
OPL535, OPL535-OC, OPL536, OPL536-OC
-2-
- 2.7 5
V VCC = 5 V DC, f = DC to 50 MHz
mA EE = 0 or 1 mW/cm2
-
8 15
mA EE = 0 or 3 mW/cm2, VCC = 5.5 V
-
8 12
mA EE = 0 or 1 mW/cm2
0.08 - 0.40 mW/cm2 TA = 25° C
EeT(+)
OPL530A, OPL530-OCA, OPL531A, OPL531-OCA 0.08
OPL535A, OPL535-OCA, OPL536A, OPL536-OCA
-
0.25 mW/cm2 TA = 25° C
OPL530B, OPL530-OCB, OPL531B, OPL531-OCB
OPL535B, OPL535-OCB, OPL536B, OPL536-OCB
0.12
-
0.40 mW/cm2 TA = 25° C
OPL550, OPL550-OC, OPL551, OPL551-OC
OPL550A, OPL550-OCA, OPL551, OPL551-OCA
.25
.25
-
-
2.4
1.4
mW/cm2
mW/cm2
VCC = 5 V, TA = 25° C
VCC = 5 V, TA = 25° C
Hysteresis Ratio
OP530, OP531 Series
1.05 1.3 1.6
-
-
EeT(+)/EeT(-)
OP535, OP536 Series
OPL550, OPL551 Series
1.05 1.2 1.5
-
-
1.50 2 2.5
-
-
OPL560, OPL561 Series
1.20 1.55 2
-
-
∆Eet(+)
(∆T)
Temperature Co-efficient
OPL530, OPL530-OC, OPL531, OPL531-OC
OPL535, OPL535-OC, OPL536, OPL536-OC
- -0.6 -
- -1.6 -
%/°C >0°C
%/°C <0°C
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. For OPL530, OPL530-OC,
OPL531, OPL531-OC, OPL535, OPL535-OC, OPL536 and OPL536-OC, a maximum of 20 grams force may be applied to leads
while at soldering temperatures.
(2) Derate linearly 2.67 mW/°C above 70° C for OPL530, OPL530-OC, OPL531, OPL531-OC, OPL535, OPL535-OC, OPL536 and
OPL536-OC. Derate linearly 2.5 mW/° C above 25° C for all devices in the OPL550, OPL551, OPL560, OPL561, OPL562 and
OPL563 series.
(3) Irradiance measurements are made with λi = 935 nm.
(4) This applies to OC versions only. For ICC on pull-up versions, add VCC/10 KΩ.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 09/08
Page 5 of 8
Share Link: 