OPL530-OC 查看數據表（PDF） - Optek Technology
零件编号
产品描述 (功能)
生产厂家
OPL530-OC Datasheet PDF : 8 Pages
| |||
Photologic Sensor
OPL530, OPL531, OPL535, OPL536, OPL550, OPL551,
OPL560, OPL561, OPL562, OPL563
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Propagation Delay
OPL530, OPL531, OPL535, OPL536
tpEeT(+)
OPL530-OC, OPL531-OC, OPL535-OC,
OPL536-OC
OPL550-OC, OPL551-OC
tpEeT(-)
Propagation Delay
OPL530, OPL531, OPL535, OPL536,
OPL530-OC, OPL531-OC, OPL535-OC,
OPL536-OC
OPL550-OC, OPL551-OC
tPLH, TPHL
Propagation Delay (Low-High/High-Low)
OPL560, OPL561
OP560-OC, OPL561-OC
- 1.0 -
- 1.0 -
- 2.5 5
- 3.0 -
- 2.5 5
µs EE = 0 or 1 mW/cm2, RL = 300 Ω to
5 V, CL = 50 pF
µs EE = 0 or 1 mW/cm2, RL = 300 Ω to
5 V, CL = 50 pF
µs VCC = 5 V, TA = 25° C,
EE = 0 or 3 mW/cm2, RL = 8 TTL
loads, f = 10 kHz, DC = 50%
µs EE= 0 or 1 mW/cm2, RL = 300 Ω to
5V, CL = 50 pF
µs VCC = 5 V, TA = 25° C, EE = 0 or 3
mW/cm2, RL = 360 Ω, f = 10 kHz,
DC = 50%
-5-
-5-
µs DC = 50%, RL = 10 TTL Loads
µs DC = 50%, RL = 300 Ω
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. For OPL530, OPL530-OC,
OPL531, OPL531-OC, OPL535, OPL535-OC, OPL536 and OPL536-OC, a maximum of 20 grams force may be applied to leads
while at soldering temperatures.
(2) Derate linearly 2.67 mW/°C above 70° C for OPL530, OPL530-OC, OPL531, OPL531-OC, OPL535, OPL535-OC, OPL536 and
OPL536-OC. Derate linearly 2.5 mW/° C above 25° C for all devices in the OPL550, OPL551, OPL560, OPL561, OPL562 and
OPL563 series.
(3) Irradiance measurements are made with λi = 935 nm.
(4) This applies to OC versions only. For ICC on pull-up versions, add VCC/10 KΩ.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A 09/08
Page 8 of 8
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Share Link: 