MM1293 查看數據表（PDF） - Mitsumi
零件编号
产品描述 (功能)
生产厂家
MM1293 Datasheet PDF : 6 Pages
| |||
MITSUMI
Protection of Lithium Ion Batteries (three cells in series) MM1293
Protection of Lithium Ion Batteries (three cells in series)
Monolithic IC MM1293
Outline
This IC provides protection for lithium ion batteries in the event of overcharging, overdischarging and
overcurrents. When anomalies occur during charging or at other times and excessive voltages are applied,
after a certain time has elapsed for each cell an external FET switch is turned off (overcharging detection) ;
and in order to prevent overdischarge of the battery during discharge, when the voltage of individual batteries
falls below a fixed voltage, an external FET switch is turned off (overdischarging detection), and the IC is put
into low-consumption current mode. When large currents flow due to a short-circuit or other cause, an
external MOS switch is turned off (overcurrent detection).
3-Cell Protection ICs
Rank
A
B
C
D
E
F
G
Overcharge Overcharge Overdischarge Overdischarge Overcurrent At overcurrent Overcurrent release
detection voltage hysteresis voltage detection voltage resume voltage detection voltage detection
conditions
Load release
4.35V±50mV 200mV typ. 2.35V typ. 3.05V typ. 150mV typ. Pin 3 (DOHG pin) L H
250kΩ or more
4.25V±50mV
2.40V typ. 3.10V typ.
Same as rank A
Same as rank A
Pin 4 (OL pin) H L
Same as rank B
Same as rank B
none (several mV)
Same as rank B
Pin 3 (DOHG pin) L H
4.10V±50mV
2.35V typ. 3.00V typ.
Same as rank A 200mV typ.
Same as rank A
Charging reset
Features
1. Current consumption (overcharging)
VCELL > VCELLU
125µA typ.
2. Current consumption (normal operation)
VCELL < VALM
30µA typ.
3. Current consumption (overdischarge)
VCELL < VCELLS
0.1µA max.
4. Overcharge detection voltage (-20 to +70°C) VCELL : L H
4.25V±50mV/CELL
5. Overcharge hystereis voltage
VCELL : H L
VCELLU-200mV/CELL typ.
6. Overcharge sensing dead time
C=0.1µF
1.0S typ.
7. Overcharge sensing operation voltage
VCELL : L H
4.10V±150mV/CELL
8. Overdischarge detection voltage
VCELL : H L
2.40V/CELL typ.
9. Overdischarge sensing dead time
C=0.1µF
1.0S typ.
10.Overcurrent detection voltage
0.15V typ.
11.Overcharge and overdischarve voltages as well as the overcurrent detection voltage can be changed upon
request.
Package
SSOP-16
Applications
Lithium ion battery pack for notebook computers
Share Link: 