TS861(2012) 查看數據表（PDF） - STMicroelectronics
零件编号
产品描述 (功能)
生产厂家
TS861 Datasheet PDF : 19 Pages
| |||
Absolute maximum ratings and operating conditions
TS861, TS862, TS864
1
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol
Parameter
Value
Unit
VCC
VID
VIN
RTHJA
RTHJC
Supply voltage(1)
Differential input voltage(2)
Input voltage range(3)
Thermal resistance junction-to-ambient(4)
SOT23-5
SO-8
SO-14
TSSOP8
TSSOP14
Thermal resistance junction-to-case(4)
SOT23-5
SO-8
SO-14
TSSOP8
TSSOP14
12
±12
-0.3 to 12.3
250
125
105
120
100
81
40
31
37
32
V
V
V
°C/W
°C/W
TSTG
TJ
TLEAD
ESD
Storage temperature range
Maximum junction temperature
Lead temperature (soldering, 10 sec.)
Human body model (HBM)(5)
Machine model (MM)(6)
-65 to +150
°C
150
°C
260
°C
2
kV
200
V
Latch-up immunity
Class A
1. All voltages values, except differential voltage are with respect to network terminal.
2. Differential voltages are non-inverting input terminal with respect to the inverting input terminal.
3. The magnitude of input and output voltages must never exceed VCC +0.3 V.
4. Short-circuits can cause excessive heating. These values are typical.
5. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through
a 1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin
combinations while the other pins are floating.
6. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
Table 2.
Symbol
Operating conditions
Parameter
VCC
VICM
TOper
Supply voltage
Common mode input voltage range
Operating free air temperature range
Value
Unit
2.7 to 10
V
VCC- - 0.3 to VCC+ + 0.3 V
-40 to + 85
°C
2/19
Doc ID 6422 Rev 3
Share Link: 