C2741-03 查看數據表（PDF） - Hamamatsu Photonics
零件编号
产品描述 (功能)
生产厂家
C2741-03 Datasheet PDF : 4 Pages
| |||
PERFORMANCE / SPECIFICATIONS
q Performance
Imaging tube
Spectral response
Horizontal center resolution
Geometric distortion (within inscribed circles)
Shading (within inscribed circles)
Lag
Gamma
S/N
Functions Standard
Optional
1- inch Infrared vidicon
400 to 1800 nm
600 TV line (typical value)
± 2.0 (maximum value)
20 % (40 %) (maximum value)
60 % (typical value)
0.6 (typical value)
46 dB (p-p/r.m.s.) (minimum value)
Contrast enhancement
Shading corrector
Diagonal shading corrector
Video booster
Video inverter
Auto gain control (AGC)
Level indicator
Video tube protection
White clipper
External synchronization control
Operational Video output
q Specifications
Video system
Horizontal scanning frequency
Vertical scanning frequency
Total number of scanning lines
Effective number of scanning lines
Interlace ratio
Aspect ratio
Synchronization system
Output Video signal (composite)
signals
Horizontal vertical
Synchronization signal
Effective scanned area of tube
Lens mount
Operating temperature
Storage temperature
Operating/Storage humidity
Line voltage
Power copmsumption
EIA
CCIR
15.734 kHz
15.625 kHz
59.94 Hz
50.00 Hz
525
625
485
509
2:1
4 : 3 (horizontal/vertical)
Internal synchronazation
1.0 Vp-p / 75 Ω Two output terminals.
(The composite video signal is output only from VIDEO OUT 1.
Operational video signal is output from VIDEO OUT 2.)
TTL level output, Negative polarity
(External synchronization control(optional) uses this output terminal as input
terminal. The horizontal vertical synchronization signal is not outputted.)
Approx. 12.7 (H) x 9.5 (V) mm
1-inch C-mount
0 to +40 ˚C
-10 ˚C to +50 ˚C
90 % or less (non-condensation)
AC 100/117/220/240 V ±10%, 50/60 Hz
80 VA or less
[Glossary of terms]
q Horizontal center resolution
This shows how far fine structure can be recognized, and it
shows how many stripes TV book display can distinguish at
the interval equivalent to the height (length) of the screen of
video, and white or black is counted as one, respectively.
q Geometric distortion
This is the difference (distortion) between the subject and the
image of the subject on the screen. It is expressed as a
percentage to the vertical height of the screen.
q Shading
Non-uniformity of the video output signal when a video camera
views a uniform source. It is expressed as the difference
between the brightest and darkest signals divided by the
brightest signal and multiplied by 100%. Shading is mainly
caused by non-uniform sensitivity of an image tube surface.
q Lag
A phenomenon caused when some of the output signal lingers
even after the incident light was interrupted. For video cameras,
this means output signal delay in response to the change of
incident light.
q Gamma characteristic
This is the relationship between the signal output and the
incident light. On a logarithmic graph, the former is shown on
the vertical axis and the latter on the horizontal axis; the
gamma characteristic is the slope (tangent) of the resulting
straight line.
q S/N ratio
A comparison of the video signal component and the noise
component that is mixed in. S/N ratio is usually shown in dB.
CONFIGURATIONS
q Camera Head
q Camera Controller
q Camera Cable (5 m)
q Video Monitor Cable (BNC-BNC, 3 m)
DIMENSIONAL OUTLINE (UNIT: mm)
q Camera Head (approx. 2 kg)
1-32UN(C-mount)
q Camera Controller (approx. 5 kg)
CAMERA HEAD
CAMERA CONTROLLER
C2741
104 ± 1
2.4 ± 0.2
204 ± 1
65 ± 0.5
9.5 ± 2
25 ± 0.5
60 ± 0.5 1/4-20UNC D=5
232 ± 1
308 ± 2
ISO 9001
Certificate: 09 105 79045
4-M4 D=5
5 Product and software package names noted in this documentation are trademarks or registered trademarks of their respective manufacturers.
q Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office.
q Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions.
Specifications and external appearance are subject to change without. notice.
© 2001 Hamamatsu Photonics K.K.
Homepage Address http://www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Systems Division
812 Joko-cho, Hamamatsu City, 431-3196, Japan, Telephone: (81)53-431-0124, Fax: (81)53-435-1574, E-mail:export@sys.hpk.co.jp
U.S.A. and Canada: Hamamatsu Photonic Systems: 360 Foothill Road, Bridgewater, N.J. 08807-0910, U.S.A., Telephone: (1)908-231-1116, Fax: (1)908-231-0852, E-mail: usa@hamamatsu.com
Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)81, 52-2658, E-mail: info@hamamatsu.de
France: Hamamatsu Photonics France S.A.R.L.: 8, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10, E-mail: infos@hamamatsu.fr
United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10Tewin Road,Welwyn Garden City, Hertfordshire, AL7 1BW, U.K., Telephone: (44) 1707-294888, Fax: (44) 1707-325777, E-mail: info@hamamatsu.co.uk
North Europe: Hamamatsu Photonics Norden AB: Smidesvägen 12, SE-171-41 Solna, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-0-31-01, E-mail: info@hamamatsu.se
Italy: Hamamatsu Photonics Italia S.R.L.: Strada della Mois, 1/E 20020 Arese (Milano), Italy, Telephone: (39)02-935 81 733, Fax: (39)02-935 81 741, E-mail: info@hamamatsu.it
Cat. No. SICS1085E02
SEP/2001 HPK
Created in Japan (PDF)
Share Link: 