VSC6501RC 查看數據表（PDF） - Vitesse Semiconductor
零件编号
产品描述 (功能)
生产厂家
VSC6501RC Datasheet PDF : 12 Pages
| |||
VITESSE
SEMICONDUCTOR CORPORATION
Advance Product Information
VSC6501
SMPTE-292M Reclocker
and Cable Driver at 1.485 Gb/s
Package Thermal Characteristics
The VSC6501 is packaged in an exposed pad, thin quad flat pack (TQFP) which adheres to industry stan-
dard EIAJ footprints for a 10x10x1.0mm body, 64 lead TQFP. The package construction is shown below. The
bottom of the lead frame is exposed so that it can be soldered to the printed circuit board and connected to the
ground plane. This provides excellent thermal characteristics and reduces electrical parasitics as well.
Figure 6: Package Cross Section
Wire Bond
Copper Lead Frame
Die
Plastic Molding Compound
Die Attach Epoxy
Ground Bond
Exposed Pad
Table 4: 64-pin, Exposed Pad TQFP Thermal Resistance
Symbol
θca-0
θca-100
θca-200
θca-400
θca-600
Description
Thermal resistance from case to ambient, still air
Thermal resistance from case to ambient, 100 LFPM air
Thermal resistance from case to ambient, 200 LFPM air
Thermal resistance from case to ambient, 400 LFPM air
Thermal resistance from case to ambient, 600 LFPM air
Value
30
25
23
21
20
Units
oC/W
oC/W
oC/W
oC/W
oC/W
The VSC6501 is designed to operate with a case temperature up to 95oC. The user must guarantee that the
case temperature specification is not violated. With the thermal resistances shown above, the VS6501 can oper-
ate in still air ambient temperatures of 70oC [~70oC = 95oC - 0.8W * 30]. If the ambient air temperature exceeds
these limits then some form of cooling through a heatsink or an increase in airflow must be provided. Additional
heat can be transferred to the printed circuit board by not using thermal reliefs on the power and ground plane
vias as well as using multiple vias to the power and ground planes.
If the exposed pad is not soldered to the printed circuit board and grounded, both thermal and electrical per-
formance will be degraded significantly.
Moisture Sensitivity Level
This device is rated with a Moisture Sensitivity Level 3 rating. Refer to Application Note AN-20 for
appropriate handling procedures.
G52310-0, Rev. 2.0
4/10/00
© VITESSE SEMICONDUCTOR CORPORATION
741 Calle Plano, Camarillo, CA 93012 • 805/388-3700 • FAX: 805/987-5896
Page 9
Share Link: 