HLMA-QL00 查看數據表（PDF） - HP => Agilent Technologies

零件编号

产品描述 (功能)

生产厂家

HLMA-QL00

Subminiature High Performance AlInGaP LED Lamps

HP => Agilent Technologies 

Absolute Maximum Ratings at TA = 25°C

HLMA-QL00/QH00/PL00/PH00

Peak Forward Current[2] ........................................................... 200 mA

Average Forward Current (IPEAK = 200 mA)[1,2] ......................... 45 mA

DC Forward Current[3,5,6] ........................................................... 50 mA

Power Dissipation .................................................................... 105 mW

HLMT-QL00/QH00/PL00/PH00

Peak Forward Current[2] ........................................................... 100 mA

Average Forward Current (IPEAK = 100 mA)[1,2] ......................... 37 mA

DC Forward Current[3,5,6] ........................................................... 50 mA

Power Dissipation .................................................................... 120 mW

All Devices

Reverse Voltage (IR = 100 µA) ........................................................ 5 V

Transient Forward Current (10 µs Pulse)[5] .............................. 500 mA

Operating Temperature Range ....................................... -40 to +100°C

Storage Temperature Range .......................................... -55 to +100°C

LED Junction Temperature .......................................................... 110°C

Lead Soldering Temperature

[1.6 mm (0.063 in.) from body .......................... 260°C for 5 seconds

SMT Reflow Soldering Temperatures

Convective Reflow ............. 235°C Peak, above 183°C for 90 seconds

Vapor Phase Reflow ........................................... 215°C for 3 minutes

Notes:

1. Maximum IAVG at f = 1 kHz.

2. Refer to Figure 6 to establish pulsed operating conditions.

3. Derate linearly as shown in Figure 4.

4. The transient peak current is the maximum non-recurring peak current these devices

can withstand without damaging the LED die and wire bonds. Operation at currents

above Absolute Maximum Peak Forward Current is not recommended.

5. Drive currents between 5 mA and 30 mA are recommended for best long term

performance.

6. Operation at currents below 5 mA is not recommended, please contact your Hewlett-

Packard sales representative.

1-163

Share Link: