PU150-10 查看數據表（PDF） - International Power DC Power Supplies
零件编号
产品描述 (功能)
生产厂家
PU150-10 Datasheet PDF : 2 Pages
| |||
GENERAL SPECIFICATIONS
INPUT SPECIFICATIONS
All specifications are typical at nominal line, full load, and 25°C.
Input voltage:
85 to 132 VAC, 170 to 264 VAC
Efficiency:
Hold-up time:
Line regulation:
Inrush current:
70% typical on all models
15 msec minimum at 115VAC
±0.5% maximum at full load
20 amps @115VAC or
40 amps @230VAC at 25°C
Input frequency:
Input current:
Leakage current:
47 to 63 Hz
3.4A (rms) for 115 VAC
2.0A (rms) for 230 VAC
0.4mA max at 110VAC 60 hz
0.8mA max at 240VAC 50 hz
Withstand voltage:
cold start
3000 VAC from input to output
OUTPUT SPECIFICATIONS
Operating temperature:
Storage temperature:
Relative humidity:
MTBF:
EMI requirements:
Safety requirements:
Switching frequency:
1500 VAC from input to ground
500 VAC from output to ground
0 to +70°C*
–40 to +85°C
5% to 95% non-condensing
100,000 hours at full load at 25°C ambient
Meets conduction limits of CISPR 22
Class B and FCC Class B
Approved to:
a) UL1950
b) CSA C22.2 No. 234
c) IEC 950 (EN60950)
100 kHz - 130 kHz
Output voltage:
See Rating Chart
Output current:
See Rating Chart
Ripple and noise:
1% peak to peak maximum
Overvoltage protection: Set at 112-132% of maximum
output voltage (on output #1 only)
Overcurrent protection: All outputs protected to short
circuit conditions
Temperature coefficient: ±0.04%/°C maximum
Transient response: Maximum excursion of 4% or
better on all models, recovering to
1% of final value 500us after a
25% step load change.
* Derate linearly from 100% load at 50°C to 50% load at 70°C
MECHANICAL SPECIFICATIONS
NOTES:
1. Dimensions shown in inches (mm).
2. Tolerance 0.02 (0.5) maximum.
3. Input connector P1 mates with Molex housing 09-50-3051
and Moles 2878 series crimp terminal.
4. Output connector P3 mates with Molex housing 09-50-3031 or
09-50-3091 for multiple outputs and Molex 2878 series crimp terminal.
5. Connector P4 mates with Molex housing 51110-0851 and pins 50394-8100
6. Weight: 0.84 Kgs (1.86 Lbs) approx. for “B” version
PIN CHART
Model
PU150-10
PU150-12
PU150-13-1
PU150-16
PU150-18
P1
P2
P3
PIN
1 231 2 1 2
AC AC AC Return Output Return N.C.
Neutral Line Ground
+V
PU150-13
PU150-14 AC AC AC Return Output Return N.C.
PU150-17 Neutral Line Ground
+V
3 1 23
PFD Inhibit Inhibit N.C.
-Ve +Ve
N.C. Inhibit Inhibit N.C.
-Ve +Ve
P4
4 56
78
N.C. Return -Sense +Sense Current
Share
N.C. Return -Sense +Sense Current
Share
PIN
Model
P1
P2
P3
P4
1 2 3 1 2 1,2 3,4,5 6 7 8 9 1 2 3 4 5 6
78
PU150-23
PU150-25
PU150-30
PU150-32
PU150-40
PU150-42
PU150-45
PU150-24 AC AC AC Comm Output Output Comm N.C. PFD N.C. N.C. Inhibit Inhibit Fan* N.C. Comm -Sense +Sense Current
Neutral Line Ground Return #1 #2 Return
-Ve +Ve
Rtn
Share
PU150-31 AC AC AC Comm Output Output Comm Output PFD N.C. N.C. Inhibit Inhibit Fan* N.C. Comm -Sense +Sense Current
PU150-33 Neutral Line Ground Return #1 #2 Return #3
-Ve +Ve
Rtn
Share
PU150-41 AC AC AC Comm Output Output Comm Output PFD Output Output Inhibit Inhibit Fan* N.C. Comm -Sense +Sense Current
PU150-44 Neutral Line Ground Return #1 #2 Return #3
#4 #4 Rtn -Ve +Ve
Rtn
Share
* Fan Voltage is equal to output #2 voltage (ex. PU150-23 has +12V fan)
International
Power Sources, Inc.
Your Source of Power ...
260 Hopping Brook Road, Holliston, MA 01746
TEL: (508) 429-4440 FAX: (800) 226-2100
75
http://www.intlpower.com
Share Link: 