HLMP-J105 查看數據表（PDF） - HP => Agilent Technologies
零件编号
产品描述 (功能)
生产厂家
HLMP-J105 Datasheet PDF : 4 Pages
| |||
Absolute Maximum Ratings
Peak Forward Current[2] ............................................................ 300 mA
Average Forward Current (@ IPEAK = 300 mA)[1,2] ...................... 30 mA
DC Forward Current[3] ................................................................. 50 mA
Power Dissipation ..................................................................... 100 mW
Reverse Voltage (IR = 100 µA) ......................................................... 5 V
Transient Forward Current (10 µs Pulse)[4] ............................... 500 mA
Operating Temperature Range ........................................ -55 to +100°C
Storage Temperature Range ........................................... -55 to +100°C
LED Junction Temperature ........................................................... 110°C
Solder Temperature ................................................ 260°C for 5 seconds
[1.6 mm (0.063 in.) from body]
Notes:
1. Maximum IAVG at f = 1 kHz, DF = 10%.
2. Refer to Figure 6 to establish pulsed operating conditions.
3. Derate linearly as shown in Figure 5.
4. The transient peak current is the maximum non-recurring peak current the device can
withstand without damaging the LED die and wire bonds. It is not recommended that
the device be operated at peak currents above the Absolute Maximum Peak Forward
Current.
Optical Characteristics at TA = 25°C
Luminous
Part
Number
Intensity
IV (mcd)
@ 20 mA[1]
Min. Typ.
Total Flux
φv (mlm)
@ 20 mA[2]
Typ.
Peak
Wavelength
λPEAK (nm)
Typ.
HLMP-J105 56.4 340
280
654
HLMP-J100 35.2 175
654
Color,
Dominant
Wavelength
λd[3] (nm)
Typ.
644
644
Viewing
Angle
2θ1/2
(Degrees)[4]
Typ.
45
55
Luminous
Efficacy
ηv
(lm/w)
85
85
Optical Characteristics at TA = 25°C
Luminous
Part
Number
(Low
Current)
Intensity
IV (mcd)
@ 0.5 mA[1]
Min. Typ.
Total Flux
φv (mlm)
@ 0.5 mA[2]
Typ.
Peak
Wavelength
λPEAK (nm)
Typ.
HLMP-J155 2.1 6.0
37.2
654
HLMP-J150 1.3 3.0
654
Color,
ZDominant
Wavelength
λd[3] (nm)
Typ.
644
644
Viewing
Angle
2θ1/2
(Degrees)[4]
Typ.
45
55
Luminous
Efficacy
ηv
(lm/w)
85
85
Notes:
1. The luminous intensity, IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern
may not be aligned with this axis.
2. φV is total luminous flux output as measured with an integrating sphere.
3. The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.
4. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
1-125
Share Link: 