EM91415 查看數據表（PDF） - ELAN Microelectronics

零件编号

产品描述 (功能)

生产厂家

EM91415

TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE AND DUAL-TONE MELODY GENERATOR

ELAN Microelectronics 

EM91415 SERIES

TONE/PULSE SWITCHABLE DIALER WITH LCD INTERFACE

AND DUAL-TONE MELODY GENERATOR

Redialing:

After normal dialing, directly keying F key (or On-Off hook once) and keying RD key on keyboard. The

numbers that are stored into LNB memory will be dialed output.

Repertory memory

The EM91415 series incorporated several sets repertory memory and each one can store number up to 16 digits.

In memory storing, if stored numbers are more than 16 digits that only the previous 16 digits can be stored

into specific memory. Otherwise, these numbers can be stored entirely. After memory dialed out, the content

of LNB is keeping to current data.

Storing of 13 sets memory types

Direct (one-touch) operation

Off-hook (or turn on HF function), push (ST, d1, d2, .. , dn [ST], EMn or M1~M10 (ROW5 optioned).) The

numbers d1, d2, .. , dn will be stored into memory location “EMn” or Mn. The “EMn” expressed emergency

memory EM1 to EM3. The Mn expressed memory M1~M10.

Indirect (two-touch) operation

Off-hook (or turn on HF function), push (ST, d1, d2, .. , dn, ST, n.) The numbers d1, d2, .. , dn will be stored

into memory location “n”. The “n” expressed digital key from 0 to 9.

Dialing (after memory dialed out, the content of LNB is keeping to current data)

Direct (one-touch) memory operation

• To select Pulse or Tone mode.

• Off-hook (or Turn on HF function), push Mn (or EMn) key. The numbers that are stored in direct memory

location “Mn (or EMn)” will be dialed out in Pulse or Tone mode as selection. The “n” expressed digital

number from 1~10 decided by dialers’ memory sets.

Indirect (two-touch) memory operation

• To select Pulse or Tone mode.

• Off-hook (or Turn on HF function), push A, n key. The numbers that are stored in indirect memory location

“n” will be dialed out in Pulse or Tone mode as selection. The “n” expressed digital key from 0 to 9.

Pause (P) key operation

The Pause (P) key is designed to support pause operation in dialing duration. “P” key can be stored in memory

and it will occupy one digital position.

• To select Pulse or Tone mode.

• Off-hook (or turn on HF function), push (d1, d2, .. , dn, RD/P, k1, k2, .. , kn.) These numbers will be dialed

out as following sequence:

d1, d2, .. , dn, Tp, k1, k2, .. , kn.

* This specification are subject to be changed without notice.

10.1.1997 6

Share Link: