XE2814 查看數據表（PDF） - Xecom
零件编号
产品描述 (功能)
生产厂家
XE2814 Datasheet PDF : 19 Pages
| |||
Class 2 Fax Commands
+FCLASS=n - Set Service Class
n=0 Configured as a data modem
n=1 Configured for Service Class 1
n=2 Configured for Service Class 2
n=3 Reserved for Service Class 3
+FCLASS=? - Available Service Class
+FCLASS? - Current Service Class
+FAA=n - Adaptive Answer
n=0 Answer as selected Service Class
n=1 Answers as a data or fax modem.
AT+FAXERR - Fax Error Value
Code Disconnect Cause
0 Normal fax disconnect
1 Ring detected but handshake
unsuccessful
2 Call terminated by the host
3 No telephone loop current
10 Phase A handshaking error
11 No answer, time out
20 Transmit Phase B error
21 Remote cannot receive or send
22 Command error transmit Phase B
23 Invalid command received
24 Response Errors
25 Local capabilites sent 3 times with
no response
26 local capabilities not recognized
27 Failed to train at lowest speed
28 Invalid response received
40 T.4 transmit data error
43 No data from host
50 Transmit Phase D error
51 Invalid Response received in
transmit Phase D
52 No response to the next page
message after 3 attempts
Code
53
54
55
56
57
58
70
71
72
73
74
90
91
93
94
100
101
102
103
Disconnect Cause
Invalid respone to the next page
message
No response to the End of Page
message after 3 attempts
Invalid response to end of page
message
No response to End of Mesage
after 3 attempts
Invalid response to End of
Message
Unable to continue after page
interrupt
Unspecified phae B error
Receive Response Error
Command received error
T.30 time out, expected page not
received
T.30 time out after end of
messsage received
Unspecified Phase C Error
Missing End of line after 5
seconds
Receive Buffer overflow
Bad check sum of frame
Receive Phase D errors
Invalid response received
Invalid command received
Unable to continue after page
interrupt
AT+FBOR=n - T.4 Data Bit Order
n=0 Selects direct order for T.4 Data
n=1 Selects reverse order for T.4 data
AT+FBUF? - Buffer Size
AT+FCR=n - Capability to Receive
n=0 Do not pass message data to host
n=1 Pass message data to host
XE2814
XECOM\11
Share Link: 