IML10 查看數據表（PDF） - Unspecified

零件编号

产品描述 (功能)

生产厂家

IML10

10 Watt DC-DC Converters

Unspecified 

Board Mountable

DC-DC Converters

10 Watt DC-DC Converters

Wide input voltage ranges up to 75 V DC

1 or 2 outputs up to 30 V DC

1500 V DC I/O electric strength test voltage

• Wide input voltage ranges

• Electrical isolation, single and double output units

• Immunity to IEC/EN 61000-4-2, -3, -4, -5 and -6

• High efficiency (typ. 84%)

• Flex power: flexible load distribution

• No load and short-circuit proof

• High reliability and no derating

• Operating ambient temperature range –25...60°C

• 2" × 1" case with 10.5 mm profile

• Supplementary insulation

Safety according to IEC/EN 60950, UL 1950

LGA

IML 10 Series

IML 10 Series

10.5

25.4

0.42"

1.0" 50.8

2.0"

Summary

The IML10 series of board mountable 10 Watt DC-DC con-

verters has been designed according to the latest industry

requirements and standards. The converters are particu-

larly suitable for use in controlled environments, in battery

supported applications in industry or telecommunications

where high power densitiy and outstanding reliability are

required.

Providing 3 input voltage ranges, 8.4...16.8, 18...36 and

36...75 V DC, the units are available with single and electri-

cally isolated double outputs allowing the configuration of

output voltages from 5 up to 30 V DC, with flexible load dis-

tribution on double output units. Features include efficient

input and output filtering with transient and surge protec-

tion, low output ripple and noise, consistently high effi-

ciency over the entire input voltage range, high reliability as

well as excellent dynamic response to load and line

changes.

The converters provide supplementary insulation with

SELV outputs as e.g. required in battery supported systems

where the bus voltage may exceed the SELV limit of

60 V DC. They are designed and built according to the inter-

national safety standards IEC/EN 60950, UL 1950, CAN/

CSA C22.2 No.950-95 and are LGA and UL marked. Ap-

provals pending.

A special feature is their small case size, 2" × 1" with

10.5 mm profile. The circuit comprises of integrated planar

magnetics and all components are automatically assem-

bled and solidly soldered onto a single PCB without any

wire connections. Magnetic feedback ensures maximum

reliability and repeatability in the control loop over all oper-

ating conditions. High efficiency, low heat dissipation and

careful considerations of possible thermal stresses ensure

the absence of hot spots providing high reliability. The ther-

mal design allows operation at full load up to an ambient

temperature of 60°C in free air without using any potting

material. Optionally the IML 10 series is available with the

industrial C pinout or with an SMD pinout, as well as with an

extended ambient temperature range –40...60°C.

Table of Contents

Page

Summary .......................................................................... 1

Type Survey and Key Data .............................................. 2

Type Key .......................................................................... 2

Mechanical Data .............................................................. 3

Page

Safety and Installation Instructions .................................. 4

Description of Options ...................................................... 7

Accessories ...................................................................... 7

Edition 6/4.2000

1/7

Share Link: