MCZ33897DEF 查看數據表（PDF） - Freescale Semiconductor
零件编号
产品描述 (功能)
生产厂家
MCZ33897DEF Datasheet PDF : 20 Pages
| |||
ELECTRICAL CHARACTERISTICS
DYNAMIC ELECTRICAL CHARACTERISTICS
DYNAMIC ELECTRICAL CHARACTERISTICS
Table 5. Dynamic Electrical Characteristics
Characteristics noted under conditions of -40°C ≤ TA ≤ 125°C, unless otherwise stated. Voltages are relative to GND unless
otherwise noted. All positive currents are into the terminal. All negative currents are out of the terminal.
Characteristic
Symbol
Min
Typ
Max
Unit
BUS
Normal Speed Rising Output Delay
200 Ω ≤ RL ≤ 3332 Ω, 1.0 µs ≤ Load Time Constants ≤ 4.0 µs
Measured from TXD = VIL to VBUS as follows:
Max Time to VBUSMOD = 3.7 V, 6.0 V ≤ VBATT ≤ 26.5 V (12)
Min Time to VBUSMOD = 1.0 V, 6.0 V ≤ VBATT ≤ 26.5 V (12)
Max Time to VBUSMOD = 2.7 V, VBATT = 5.0 V (12)
Min Time to VBUSMOD = 1.0 V, VBATT = 5.0 V (12)
t DLYNORMRO
2.0
–
Normal Speed Falling Output Delay
200 Ω ≤ RL ≤ 3332 Ω, 1.0 µs ≤ Load Time Constants ≤ 4.0 µs
Measured from TXD = VIH to VBUS as follows:
Max Time to VBUSMOD = 1.0 V, 6.0 V ≤ VBATT ≤ 26.5 V (12)
Min Time to VBUSMOD = 3.7 V, 6.0 V ≤ VBATT ≤ 26.5 V (12)
Max Time to VBUSMOD = 1.0 V, VBATT = 5.0 V (12)
Min Time to VBUSMOD = 2.7 V, VBATT = 5.0 V (12)
t DLYNORMFO
1.8
–
High-Speed Rising Output Delay
75 Ω ≤ RL ≤ 135 Ω, 0.0 µs ≤ Load Time Constants ≤ 1.5 µs,
8.0 V ≤ VBATT ≤ 16 V
Measured from TXD = VIL to VBUS as follows:
Max Time to VBUS = 3.7 V (13)
Min Time to VBUS = 1.0 V (13)
t DLYHSRO
0.1
–
High-Speed Falling Output Delay
75 Ω ≤ RL ≤ 135 Ω, 0.0 µs ≤ Load Time Constants ≤ 1.5 µs,
8.0 V ≤ VBATT ≤ 16 V
Measured from TXD = VIH to VBUS as follows:
Max Time to VBUS = 1.0 V (13)
Min Time to VBUS = 3.7 V (13)
t DLYHSFO
0.04
–
Notes
12. VBUSMOD is the voltage at the BUSMOD node in Figure 7, page 15.
13. VBUS is the voltage at the BUS terminal in Figure 8, page 15.
µs
6.3
µs
8.5
µs
1.7
µs
3.0
33897/A/B/C/D/T
10
Analog Integrated Circuit Device Data
Freescale Semiconductor
Share Link: 