HFBR-53D5 查看數據表（PDF） - Avago Technologies
零件编号
产品描述 (功能)
生产厂家
HFBR-53D5 Datasheet PDF : 16 Pages
| |||
3
fault conditions per EN60825-1.
Agilent has tested the transceiver
design for compliance with the
requirements listed below under
normal operating conditions and
under single fault conditions
where applicable. TUV Rheinland
has granted certi-fication to these
transceivers for laser eye safety
and use in EN 60950 and EN
60825-2 applications. Their
performance enables the
transceivers to be used without
concern for eye safety up to 7
volts transmitter VCC.
CAUTION:
There are no user serviceable
parts nor any maintenance
required for the
HFBR/HFCT-53D5. All
adjustments are made at the
factory before shipment to our
customers. Tampering with or
modifying the performance of the
HFBR/HFCT-53D5 will result in
voided product warranty. It may
also result in improper operation
of the HFBR/HFCT-53D5
circuitry, and possible overstress
of the laser source. Device
degradation or product failure
may result.
Connection of the HFBR/HFCT-
53D5 to a nonapproved optical
source, operating above the
recommended absolute maximum
conditions or operating the
HFBR/HFCT-53D5 in a manner
inconsistent with its design and
function may result in hazardous
radiation exposure and may be
considered an act of modifying or
manufacturing a laser product.
The person(s) performing such
an act is required by law to
recertify and reidentify the laser
product under the provisions of
U.S. 21 CFR (Subchapter J).
Regulatory Compliance
Feature
Test Method
Electrostatic Discharge MIL-STD-883C
(ESD) to the
Method 3015.4
Electrical Pins
Electrostatic Discharge Variation of IEC 801-2
(ESD) to the
Duplex SC Receptacle
Electromagnetic
Interference (EMI)
Immunity
FCC Class B
CENELEC EN55022 Class B
(CISPR 22A)
VCCI Class I
Variation of IEC 801-3
Laser Eye Safety
and Equipment Type
Testing
US 21 CFR, Subchapter J
per Paragraphs 1002.10
and 1002.12
Performance
Class 1 (>2000 V).
Typically withstand at least 15 kV without
damage when the duplex SC connector
receptacle is contacted by a Human Body
Model probe.
Margins are dependent on customer board and
chassis designs.
Typically show no measurable effect from a
10 V/m field swept from 27 to 1000 MHz applied
to the transceiver without a chassis enclosure.
AEL Class I, FDA/CDRH
HFBR-53D5 Accession #9720151- 03
HFCT-53D5 Accession #9521220-16
Component
Recognition
EN 60825-1: 1994 +A11
EN 60825-2: 1994
EN 60950: 1992+A1+A2+A3
AEL Class 1, TUV Rheinland of North America
HFBR-53D5:
Certificate #R9771018.5
Protection Class III
HFCT-53D5:
Certificate 933/51083
Underwriters Laboratories and
Canadian Standards Association
Joint Component Recognition
for Information Technology
Equipment Including Electrical
Business Equipment.
UL File E173874 (Pending)
Share Link: 