3. Electrical Specification
The T315HW01 V0 requires two power inputs. One is employed to power the LCD electronics and to drive the TFT
array and liquid crystal. The second input power for the BLU, is to power inverter..
3-1 Electrical Characteristics
Parameter
Values
Unit Notes
Min Typ Max
LCD:
Power Supply Input Voltage
Vcc
10.8
12 13.2 Vdc
1
Power Supply Input Current
Icc
-
0.55 0.65
A
2
Power Consumption
Pc
-
6.6 7.5 Watt
2
Inrush Current
IRUSH
-
-
6 Apeak 3
LVDS Differential Input High Threshold VTH
100
mV
4
Interface Voltage
Differential Input Low Threshold VTL
100
mV
4
Voltage
Common Input Voltage
VCIM 1.10 1.25 1.40
V
4
CMOS Input High Threshold Voltage
Interface
Input Low Threshold Voltage
Backlight Power Consumption
VIH
2.4
(High)
VIL
0
(Low)
PDDB 110
3.3
Vdc
0.7
Vdc
115 120 Watt
Life Time
50,000
Hours 6
Note :
1. The ripple voltage should be controlled under 10% of VCC
℃ 2. Vcc=12.0V, fv = 60Hz, fCLK=81.5Mhz , 25 , Test Pattern : White Pattern
3. Measurement condition :
VCC
90%
10%
GND
Trush = 470 uS
◎Copyright AU Optronics, Inc.
January, 2003 All Rights Reserved.
7/27
No Reproduction and Redistribution Allowed
T315HW01 V0 - Spec. Ver 0.2