CT50-T 查看數據表（PDF） - LEM Industrial

零件编号

产品描述 (功能)

生产厂家

CT50-T

Current Transducer CT 50-T

LEM Industrial 

Dimensions CT 50-T (in mm. 1 mm = 0.0394 inch)

Front view

Left view

Secondary terminals

Terminal + : supply voltage + 15 V

Terminal M : measure

Terminal 0 : 0 V

Terminal - : supply voltage - 15 V

Connection

Top view

Mechanical characteristics

Remarks

•General tolerance

•Fastening

•Connection of primary

Fastening torque

•Connection of secondary

Fastening torque

± 0.3 mm

2 x M5 screws

M8 threaded studs

9 Nm or 6.63 Lb - Ft

M5 threaded studs

2.2 Nm or 1.62 Lb - Ft

•VOUT is positive when IP flows in the direction of the arrow.

•This transducer induces into the primary circuit a square

wave of 7 mV amplitude (frequency ≈220 Hz). This voltage

can induce an AC current in the primary if the primary

impedance is low.

•This is a standard model. For different versions (supply

voltages, turns ratios, unidirectional measurements...),

please contact us.

LEM reserves the right to carry out modifications on its transducers, in order to improve them, without previous notice.

Share Link: